YY250T Winter Maintenance By burrhead (Read 593 times)

[burrhead]

Beginning today my company like a lot of manufacturing facilities will be going on our annual holiday two week shutdown. A few months ago I told myself that during this time I would do the PDI work that I didn't do when I first received my new scoot. What I haven't done yet and wish to do now is to replace all of the hoses and replace most lights with LEDs and I know that entails removing all or most of the plastics. From what I have read on this forum it's not something that anyone looks forward to. So what I need is any help in this regard and if you could answer the following list of questions and concerns? Thanks in advance.......Dave
- is there a proper sequence to removing the plastics and is there any kind of plastics diagram for a Roketa YY250T?
- what hoses should I replace.......vacuum, fuel and cooling water? Are there any others that I'm not aware of?
- I have already replaced all of the tail lights to LED......I am assuming the front lights will be as simple. Does anyone know what LED lights are required for the front turning signal, running lights and headlight?
- is there anything else I should do while I have the plastics removed?

[bobf]

Your description is way too broad. To me, YY 250 T is a broad family name that appears to be a approval designation, not a scooter type itself.

You want a Roketa scooter description and includes photo's, then use this link to Roketa descriptions. Scroll down through the models and find yours, if it is in there. Then click on the sale parts & menu button. You will be able to see what is on your scoot in more detail.

.roketa.com/product/productlist/2610.shtml" rel="nofollow" target="_blank">.roketa.com/product/productlist/2610.shtml

For me, I have the MC-54-250 with the 244cc engine, it's companion the MC-54B-250 has the 257 cc engine and some other items difference.

When I took my covers off I found that I had to remove the luggage box and then the seat. Then I was able to take the many screws off each side. Removed a small panel at the rear and more screws. Then I could swing the sides loose and push them back out of the way. But to actually remove them I also had to remove the key assembly. Both rear panels were still attached at the rear but I was able to lift them together and move the two panels aside, out of the way.

Depending on your particular machine yours may be the same or similar. Mostly a look and think to determine the best way to go.

If you want to lift the floor panel you will also need to remove some screws on the front panels so you can swing them away while removing the floor panels. It is more a time consuming job than a hard job.

[burrhead]

My scoot looks identical to the picture on your attachment......I have the 244 cc engine.........thanks for the reply.......

[bobf]

OK then. Try this link for the MC 54 250 with the 244 cc engine.

.roketa.com/product/product_support.jsp?cateID=2610&sonCateID=0&proID=2658" rel="nofollow" target="_blank">.roketa.com/product/product_support.jsp?cateID=2610&sonCateID=0&proID=2658

Did you scan down the link I gave in my first response? You could find it that way or use my current link.
.

[scot]

HI BOB THAT IS A GREAT LINK I AM NOT SURE I CAN DOWN LOAD IT BUT I AM PRETY SURE CAN JUST GO THERE ANYTIME I WANT ,I WAS THINKING I PROBLEY WOULD NOT BUY PARTS FROM THERE THEY LOOK OVER PRICED  $80.00 FOR THE BATTERY ,ANYHOW THANKS FOR THE HELP ON THE OTHER THREAD ,I WAS WONDERING WHEAR ARE YOU GUYS GETTING THE  LED LIGHTS HEAD LIGHT TURN LIGHTS AN TAIL LIGHTS ARE THEY STANDARD LIGHTS ONE CAN BUY AN AUTO ZONE ,THATS PROBLEY ALL I WILL REPLACE ,I WILL JUST KEEP CLOSE EYES ON HOSES AFTER FIRST YEAR ,BUT YES IF THE LEDS LIGHT ARE BETTTER WITH LESS WATTS WILL BE GREAT ,THAT IS GOOD LINK THOUGH TO SEE WHEAR AL IS AT THANKS BOB  SCOTT  

[burrhead]

Where do I find the cross reference number for the front running lights, turn signal lights and headlight......want to change them to halogen lights.......

[burrhead]

I have most of the plastics off....what a pain in the rear!!

[scot]

WARDEN_JP2002 AN HE WILL ASK TO SEND PICTURES OF THE LED BULBS HE CAN GET I HAVE NOT Taken my out yet ,so when someone writes down any reference #s I will try led seems what the guys are doing then use less power yes seller is on ebay