Junior
Currently Offline
Posts: 150
A+'s: 0
Joined: Jul 8, 2011 8:03:23 GMT -6
|
Post by scooterran on Sept 10, 2013 11:20:08 GMT -6
On my way home from work, ridding my scoot, I felt grinding through the scoot. About a mile later the tac reved and then I began to smell tranny oil as I was going up an overpass the scoot. Before I reached the top of the overpass the scoot slowed down to a stop.  Motor would start but no go when I gave it the gas.  ( 12:45 am) Retrieved scoot next day. Hole in cvt cover. Going to need one of these. Took cover off , found a little spring. ? Do you think I might have an axel bearing go bad or what may be my problem. Here we go again  Where is the help located on the pro boards ? |
|
|
|
Post by alleyoop on Sept 10, 2013 12:46:34 GMT -6
What is this a 50cc or a 150cc? If it has a kickstarter it could be a spring from the kickstarter.
HOLE In CVT??? are you saying something put a hole in the CVT?? Take a picture of the CVT Cover and the CVT so we can see what is going on.
Alleyoop
|
|
Junior
Currently Offline
Posts: 150
A+'s: 0
Joined: Jul 8, 2011 8:03:23 GMT -6
|
Post by scooterran on Sept 10, 2013 23:50:21 GMT -6
Alley , it's a mc 250 b just like the one J. R. has . Looks as though the rear shaft has moved forward and the clutch has made a hole in the cover. I need to get the belt off so I can go further. I thought there was a video on removing all this but I can't find it. Still in search for what ever will help me.  I guess I could take pics with my phone and send them to JR. |
|
|
|
Post by alleyoop on Sept 13, 2013 12:46:00 GMT -6
|
|
|
|
Post by JR on Sept 13, 2013 15:26:25 GMT -6
Got to get her apart and take pics as you go Randy. Go to the Yamaha manual section and open the YP250 majesty manual and in the mean time I'll look for some other material.
JR
|
|
|
|
Post by JR on Sept 13, 2013 17:43:54 GMT -6
One video here at least shows the gearbox opened up. He had some spacer washers break and messed up some of the gears.
JR
|
|
|
|
Post by ellpee on Sept 14, 2013 8:10:29 GMT -6
Got to get her apart and take pics as you go Randy. Go to the Yamaha manual section and open the YP250 majesty manual and in the mean time I'll look for some other material. JR Thought that sounded like a good thing to have, so I looked around the manual section and searched for "Yamaha," "YP250," and "Majesty" with no hits. Can you point me? |
|
|
|
Post by richardthescooter3 on Sept 14, 2013 10:02:13 GMT -6
Hey guys recently I've been hearing and feeling a rubber in I think my CVT, I can feel it in my seat area and almost sound like a bearing going out  climbing hill it seems to rub more  what could it be? |
|
|
|
Post by alleyoop on Sept 14, 2013 10:17:37 GMT -6
|
|
|
|
Post by ellpee on Sept 15, 2013 8:04:14 GMT -6
Thanks, got it; was thinking it was somewhere on THIS forum. Surprised to read that a Yamaha manual on a 250 from way back in the 90's is Ice Bear's source of information for a new 300. |
|
|
|
Post by JR on Sept 15, 2013 8:41:07 GMT -6
|
|
|
|
Post by ellpee on Sept 15, 2013 17:43:50 GMT -6
Thanks. As I said, I searched on Yamaha and other terms in your post, and also just browsed in non-Chinese in various sections of the forum, and missed it. I see now it's on page 2, guess I didn't notice that, though I'm surprised the searches didn't find it. |
|
|
|
Post by JR on Sept 17, 2013 11:27:27 GMT -6
Hey guys recently I've been hearing and feeling a rubber in I think my CVT, I can feel it in my seat area and almost sound like a bearing going out climbing hill it seems to rub more what could it be? Check the swing arm bearing. I had one almost go out on my wife's scooter.  JR |
|
|
|
Post by ellpee on Sept 17, 2013 18:33:27 GMT -6
Hey guys recently I've been hearing and feeling a rubber in I think my CVT, I can feel it in my seat area and almost sound like a bearing going out climbing hill it seems to rub more what could it be? Try keeping them in your wallet! (Sorry, couldn't resist....) |
|
|
|
Post by richardthescooter3 on Sept 19, 2013 10:01:52 GMT -6
Hey guys it seems that my front caliper is haning up, its hard to spin the wheel, never had the front brake caliper off, what do you think?
|
|
..BAD TO THE BONE..
