No Running lights By kczukiman (Read 469 times)

[kczukiman]

Hi all,
I just purchased a Jonway YY250T 244cc for my wife,(Red of Course) , she is graduating from her 5 year stint with her Lance Vintage 150cc. For some reason she has no running lights. Brake lights work fine. Should I be looking for a ground issue ?

Thanks, Dave

[ellpee]

Odd that BOTH would be kaputt. By my wiring diagram they are on the same live and ground circuit as a whole bunch of other things including turn signals and gauge lights. Do those other things work? If so it would suggest to me, unlikely though it sounds, that both bulbs are bad or both sockets have some issue or both connectors that hook them into the "main line" are fritzed -- poorly connected or defective in some way. As I say, very odd that both would be dead at the same time. Good luck.

[kczukiman]

[replyingto=ellpee]ellpee[/replyingto]thanks for the reply. Its got me scratching my head. I put new bulbs in and nothing. You may be on to something with bad sockets.

[justbuggin2]

check the connectors under the gauge cluster sounds like one may not be hooked up

[kczukiman]

[replyingto=justbuggin2]justbuggin2[/replyingto]Will do. Thank you.

[kczukiman]

[replyingto=kczukiman]kczukiman[/replyingto]Well, I forgot these dang things have a fuse box under the seat.

I took the battery cover off and there she was in all her glory. It was a blown fuse. Thanks for the responses.