New Student
Currently Offline
Posts: 15
A+'s: 0
Joined: Feb 14, 2012 6:50:13 GMT -6
|
Post by tinman28 on Sept 5, 2012 7:52:44 GMT -6
I'm looking for an intake manifold for my Linahi engine that uses a vog manifold. Ordered one from "scootertronics" but after a month of waiting and no responce to e-mails or phone calls I'm chalking them up as losers. I would be happy with a good used one. I have not found any other sites that have the correct one, most want to sell you a GY6 150 manifold.
Any ideas???
I would advise anyone to avoid "scootertronics" as they seem to have "issues"
|
|
|
|
Post by richardthescooter3 on Sept 5, 2012 8:43:12 GMT -6
|
|
|
|
Post by alleyoop on Sept 5, 2012 11:08:56 GMT -6
|
|
|
|
Post by JR on Sept 5, 2012 13:34:04 GMT -6
Going to need to know which one you have? Some are like the one Alley listed with a carb that bolts on to the manifold but a majority of them use the hose clamp type.
On the 250B the intake has two vacuum posrt nipples and this intake is like finding hen's teeth. They make a single vacuum post that will work but one has to route all the vacuum hoses to it and join them together by Tee's or Y's.
Let us know which intake you have.
JR
|
|
|
|
Post by alleyoop on Sept 5, 2012 16:35:19 GMT -6
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Sept 5, 2012 21:47:06 GMT -6
|
Post by wildbill84 on Sept 5, 2012 22:41:16 GMT -6
|
|
|
|
Post by JR on Sept 6, 2012 4:35:39 GMT -6
Welcome to the forum Wildbill!  He needs to send us a picture of his intake because I believe the VOG linhai is like mine the longer intake and the 4 that you and Alley listed are too short. JR |
|
New Student
Currently Offline
Posts: 15
A+'s: 0
Joined: Feb 14, 2012 6:50:13 GMT -6
|
Post by tinman28 on Sept 6, 2012 7:46:27 GMT -6
My 250 had a cast intake that the carb bolted to. Since parts (jets, etc.) are hard to come by for this carb I want to change it over to the rubber clamp on type to allow a choice of carbs. Attached is a picture of what I have now. Looks like the one from e-bay that Alley listed is correct. A lot of places list one for the vog 250 style but they look like a standard GY6 150. Anyone ever change from the cast to the rubber? Attachments:
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Sept 5, 2012 21:47:06 GMT -6
|
Post by wildbill84 on Sept 7, 2012 19:54:40 GMT -6
Thanks JR!!
|
|
New Student
Currently Offline
Posts: 15
A+'s: 0
Joined: Feb 14, 2012 6:50:13 GMT -6
|
Post by tinman28 on Sept 9, 2012 7:29:38 GMT -6
Recieved an intake from an e-bay vendor today, the one alley suggested. It is the correct one at HALF the price and only a 3 day wait compaired to "scooter- losers" Thanks for the help guys! Now I need to find a good carb.....  |
|
..BAD TO THE BONE..
