Recent Posts  By   (Read times)

There are 3 yellow wires that come from my stator, at the first connector its all melted real bad. I cut the wires from the plug then twisted them together and wrapped with elec. tape really good. My readings were 17v, almost 17v, and about 8v. they kept fluctuating.
I plugged in my taillights and they were really dim. After unplugging both connectors from the regulator and hooking them back up my taillights were bright again. Yellow wires got really hot when i unhooked them, so i hooked them back up, So with all the wires still hooked to the regulator this is my readings.

Yellow Side
6.2-6.4
1.8-2.1
5.44

Other side (going to power everything)
10.6
12.2
-.17 to -.20 or so

Suddenly now my taillights are full brightness.

With these whacked readings do you think I need a regulator or stator?