Sophomore
Currently Offline
Posts: 91
A+'s: 0
Joined: Jul 9, 2011 0:21:34 GMT -6
|
Post by chrispetty1 on Jun 26, 2012 8:21:23 GMT -6
How do you replace the wheel bearings they are rs 6200 do you need special tools or anything?
|
|
|
|
Post by justbuggin2 on Jun 26, 2012 11:08:30 GMT -6
you should be able to use a punch and tap them out just be sure you put the spacer back in when you put the new bearings back in
|
|
|
|
Post by JR on Jun 26, 2012 17:54:03 GMT -6
Justbuggin is right on Chris and there is no dumb questions when people need help or need to know.
JR
|
|
Sophomore
Currently Offline
18 more months until retirement.
Posts: 91
A+'s: 1
Joined: Jul 8, 2011 20:11:58 GMT -6
|
Post by tankrider on Jul 5, 2012 10:10:05 GMT -6
If you're replacing the rear wheel/frame extension bearing don't forget to removed the 'c clip' after you remove the oil seal. I beat on mine and even heated it up before I realized there was a 'c clip'. I have found out that the rear bearing on a GY6 Tank and similar scoots is a typical 6203 bearing which is available almost anywhere. No need to order one and spend shipping costs. I haven't replaced my front axle bearings yet so I don't know what size they are.
|
|
