|
|
Post by jct842 on May 13, 2012 20:48:09 GMT -6
It is possible that the oil pump took a dump too. But ....... running WOT with a new engine or ring job is a good way to kill even a honda or the like. Untill you find out the exact cause I would be afraid to try any more repairs. What you did with a ring job appears to have treated the symptoms not the cause./
|
|
Sophomore
Currently Offline
Blitz Moped B&M Tech
Posts: 58
A+'s: 0
Joined: Dec 6, 2011 16:54:42 GMT -6
|
Post by blitztek on May 13, 2012 22:10:26 GMT -6
check to see if it has a "cover" over the fan shroud. some JCL's and other bikes come with a fancy chrome trim ring on the fan shroud and limits the air flow by like half. throw that crap away  If you look close in the pic, you can see that I run a HOCA 125/150 type 2 chrome fan. I also cut out the "grill" for max air flow and run rich. no problems yet in this texas heat. I am currently stretching aluminum mesh into an convex "bowl" to keep debris and toddler fingers out. |
|
Junior
Currently Offline
Posts: 126
A+'s: 0
Joined: Apr 29, 2012 10:38:10 GMT -6
|
Post by godfeast on May 14, 2012 15:00:43 GMT -6
I hate guessing. *sigh*
|
|
Junior
Currently Offline
2011 Taotao CY150-A 157QMJ
Posts: 100
A+'s: 0
Joined: Apr 16, 2012 9:23:19 GMT -6
|
Post by HotStuff2 on May 18, 2012 13:34:03 GMT -6
You can't really see it, but I'm running the stock fan, and I cut off all the plastic grill, and put on a 4" 45° PVC pipe. I found an old chrome toothbrush holder at the flea market for a dollar; the bottom of it was a mesh-type, so I cut everything off, and affixed the metal mesh to the PVC pipe using QuickSteel Epoxy Putty. Seems to be working great, IMO.    |
|
