Sophomore
Currently Offline
Posts: 95
A+'s: 0
Joined: Apr 6, 2012 10:25:17 GMT -6
|
Windshield
by: gowron78 - Apr 18, 2012 10:46:30 GMT -6
Post by gowron78 on Apr 18, 2012 10:46:30 GMT -6
Another question about my YY250T is the windshield. Not sure if anyone else experiences this but when I get to around 65-70mph, the windshield vibrates so bad from turbulence that it shakes the whole front of the bike. Are there any good alternatives or solutions to this?
|
|
|
Windshield
by: travler1 - Apr 18, 2012 11:02:12 GMT -6
Post by travler1 on Apr 18, 2012 11:02:12 GMT -6
ya a lot of the guys here in ohio are going to lows and buying a little thicker and stiffer lexon and making their own, low cost, works vary well and no more vibration, and better quilty to boot, travler 1
|
|
Sophomore
Currently Offline
Posts: 95
A+'s: 0
Joined: Apr 6, 2012 10:25:17 GMT -6
|
Windshield
by: gowron78 - Apr 18, 2012 11:34:19 GMT -6
Post by gowron78 on Apr 18, 2012 11:34:19 GMT -6
So how do you make your own exactly? I'd assume just heat it up to form it how you need then drill some holes. Just not sure how to go about doing all that.
|
|
|
Windshield
by: travler1 - Apr 18, 2012 14:25:17 GMT -6
Post by travler1 on Apr 18, 2012 14:25:17 GMT -6
ok il get the info an just its done, i know it only takes these guys about a half hour to make their own, so ill get the info for you travler 1
|
|
|
Post by JR on Apr 18, 2012 14:58:39 GMT -6
|
|
Sophomore
Currently Offline
Posts: 95
A+'s: 0
Joined: Apr 6, 2012 10:25:17 GMT -6
|
Windshield
by: gowron78 - Apr 18, 2012 15:01:52 GMT -6
Post by gowron78 on Apr 18, 2012 15:01:52 GMT -6
|
|
|
Post by JR on Apr 18, 2012 15:29:02 GMT -6
Good deal put that site on my favorites. Now that is the standard windsheild but I use the one about 7" taller, no bugs!
Also try ebay on this just put in honda reflex givi windsheild. Sometimes one gets lucky and gets a deal on an auction?
JR
|
|
Sophomore
Currently Offline
Posts: 95
A+'s: 0
Joined: Apr 6, 2012 10:25:17 GMT -6
|
Windshield
by: gowron78 - Apr 18, 2012 16:32:12 GMT -6
Post by gowron78 on Apr 18, 2012 16:32:12 GMT -6
|
|
|
Windshield
by: alleyoop - Apr 19, 2012 14:58:01 GMT -6
Post by alleyoop on Apr 19, 2012 14:58:01 GMT -6
|
|
Sophomore
Currently Offline
Posts: 95
A+'s: 0
Joined: Apr 6, 2012 10:25:17 GMT -6
|
Windshield
by: gowron78 - Apr 19, 2012 15:46:21 GMT -6
Post by gowron78 on Apr 19, 2012 15:46:21 GMT -6
|
|
|
Windshield
by: terrilee - Apr 19, 2012 16:10:29 GMT -6
Post by terrilee on Apr 19, 2012 16:10:29 GMT -6
i have a universal PUIG
it fits ok keeps the bugs & winter freeze off $20
they might not make universal's for 250's
|
|
New Student
Currently Offline
Posts: 39
A+'s: 0
Joined: Apr 9, 2012 12:35:33 GMT -6
|
Windshield
by: fairweasel2323 - Apr 21, 2012 18:52:57 GMT -6
Post by fairweasel2323 on Apr 21, 2012 18:52:57 GMT -6
mine vibrated on my Bali I added some rubber o rings as washers no more vibrating! will probably look into a better shield later as it is a thin cheap shield! Would anybody have a link to site to get better replacement for the Honda Foresight clone MC-13-250/YY250T-2 aka Bali 250 lol I hate that my scoot as so many names got Jonway badge with Roketa and Jonways model numbers lol but aint had any good luck maybe cause the Foresight was never released in the US or Im not looking at right places can find the stock china replacement but want a nicer one like a Givi. The stock replacement for the helix dont look the same as body is different. found this not sure if it will work with the extension blocking ur hands too?? .moto24.org/givi-honda-foresight-250-97-08-specific-windshield.html" rel="nofollow" target="_blank">.moto24.org/givi-honda-foresight-250-97-08-specific-windshield.html
|
|
New Student
Currently Offline
Posts: 39
A+'s: 0
Joined: Apr 9, 2012 12:35:33 GMT -6
|
Windshield
by: fairweasel2323 - Apr 21, 2012 18:57:54 GMT -6
Post by fairweasel2323 on Apr 21, 2012 18:57:54 GMT -6
|
|
New Student
Currently Offline
Posts: 39
A+'s: 0
Joined: Apr 9, 2012 12:35:33 GMT -6
|
Windshield
by: fairweasel2323 - Apr 21, 2012 18:59:44 GMT -6
Post by fairweasel2323 on Apr 21, 2012 18:59:44 GMT -6
I will post better close up pic tomorrow but looks just little different on sides
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Apr 4, 2012 13:12:12 GMT -6
|
Windshield
by: chibs - Apr 21, 2012 20:03:13 GMT -6
Post by chibs on Apr 21, 2012 20:03:13 GMT -6
Just FYI - i emailed GIVI and the D211ST is no longer available. Only the D210 is still being made. So if you manage to find a 211ST consider yourself lucky. I can't seem to find the Cee Bailey one anymore either.
|
|