New Student
Currently Offline
Posts: 1
A+'s: 0
Joined: Aug 8, 2012 21:43:42 GMT -6
|
Post by wizardone01 on Aug 9, 2012 8:27:35 GMT -6
|
|
New Student
Currently Offline
Posts: 1
A+'s: 0
Joined: Aug 8, 2012 21:43:42 GMT -6
|
Post by wizardone01 on Aug 8, 2012 21:54:23 GMT -6
Hopefully someone has heard about this one...right now, I am suspecting a bad starter sellenoid, but here is what is happening now. With the key in the on position, and kill switch in the run position it acts like there is no power going to the front of the bike (no lights, no sound, no horn, nothing. So I short the sellenoid with a screew driver, give it a little gas as the starter is running, and magic happens, it starts runs and everthing works...
But wait, another wierd situation was discovered as I was trying to figure this out. If with the key on and in run position with the engine running, if you activate EITHER of the brakes, and depress the start switch, the starter motor will run.
Any advice would be sincerely appreciated....
|
|