New Student
Currently Offline
Posts: 8
A+'s: 0
Joined: Jun 6, 2012 11:37:28 GMT -6
|
Post by lennie11b on May 26, 2012 17:28:13 GMT -6
so why am i getting nothing on green to yellow on my stator but yellow to yellow reved goes 50+acv Attachments:
|
|
New Student
Currently Offline
Posts: 8
A+'s: 0
Joined: Jun 6, 2012 11:37:28 GMT -6
|
Post by lennie11b on May 26, 2012 15:32:03 GMT -6
MY Findings the r/r colors are red, white, green,yellow,yellow,yellow. My cdi wire colors are i think it was it were Red/white, Black/yellow, Black/red, Black/white, Green. With the R/R totally unplugged stator read. Green to Yellow 0's all three. Yellow to Yellow read 18 to 23 at a idle and 30+ at a rev up. The red wire from the R/R with engine off read 0dcv. Engine on idle 3.5 -4dcv at a rev went down to 1dcv I'm still looking for the engine ground and frame ground have no idea where to look but What do you guys think
|
|
New Student
Currently Offline
Posts: 8
A+'s: 0
Joined: Jun 6, 2012 11:37:28 GMT -6
|
Post by lennie11b on May 26, 2012 14:27:43 GMT -6
Well i checked the stator like you guys said with green to yellow there is nothing but with yellow to yellow there is 18-23acv up in the 30's with a revup on my r/r wires there are 3 yellow and red white and green i disconeccted the r/r and checked the yellows to yellow and got 30 acv to so is this a good sign or a bad one thanks for the help i don't know the make but it is a yy150t-2
|
|
New Student
Currently Offline
Posts: 8
A+'s: 0
Joined: Jun 6, 2012 11:37:28 GMT -6
|
Post by lennie11b on May 26, 2012 9:42:34 GMT -6
Thanks for the reply i'm about to go get a better multimeter because mine sucks. but i found a wire up at the headlights a 2 plug with a black and green wire it is unplugged i don't know where it goes but there is no where to plug it in as i can see. for the switch question it is a high low beam switch. ill be back when i get my readings and will post them Thanks  |
|
New Student
Currently Offline
Posts: 8
A+'s: 0
Joined: Jun 6, 2012 11:37:28 GMT -6
|
Post by lennie11b on May 25, 2012 22:52:11 GMT -6
Yeah i ordered one that looks and match's the one on there do you think that could be my problem with my lights?
|
|
New Student
Currently Offline
Posts: 8
A+'s: 0
Joined: Jun 6, 2012 11:37:28 GMT -6
|
Post by lennie11b on May 25, 2012 21:47:04 GMT -6
2008 Jonway 150cc Trying to figure out my lights!!! |
|
New Student
Currently Offline
Posts: 8
A+'s: 0
Joined: Jun 6, 2012 11:37:28 GMT -6
|
Post by lennie11b on May 25, 2012 21:41:35 GMT -6
well thanks for the reply my scoot is a 2008 jonway 150cc i believe it is a 6 wire 2 plug regulator. looks like yellow wires a red and a few others. the scoot had this problem when i bought it a week ago. It has 81 miles so i guess it sat a while. I'm just now learning so any tips would help
THANKS
|
|
New Student
Currently Offline
Posts: 8
A+'s: 0
Joined: Jun 6, 2012 11:37:28 GMT -6
|
Post by lennie11b on May 25, 2012 12:11:30 GMT -6
Well my running lights don't work they run off im guessing ac. My high beams work they run off DC. I changed the switch and that did not work. So i noticed my regulator is getting hot and my battery is not charging so what do you guys think. Thanks for the help
|
|
