New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Aug 22, 2012 23:23:01 GMT -6
i havent given up yet
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Aug 1, 2012 20:32:24 GMT -6
had this thing since Christmas put a whole 27 miles on it
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Jul 31, 2012 12:44:18 GMT -6
still trying
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Jul 17, 2012 18:30:32 GMT -6
why at the regulator plug in the reg plugs has 3 yellow and the other has a black . green,red and on the harness side it has 3 yellow , and on the other plug on the harness side it has a green ,black and a yellow is the yellow wire same as the red ?
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Jul 17, 2012 15:29:51 GMT -6
checked the dash bulbs they have been replaced with a higher watt bulbs ,would this make a difference? by passed the diode with a 30 amp relay
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Jul 17, 2012 15:25:49 GMT -6
put on new regulator ,still not charging enough,it goes from 11.86 volts to 12.01
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Jun 18, 2012 20:49:59 GMT -6
im sry but i still dont know what rectfier to order
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Jun 4, 2012 22:22:38 GMT -6
so jr the regulator i need is part number 269-999006 ?
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on May 30, 2012 21:06:57 GMT -6
still not sure which regulator to get and where
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on May 29, 2012 13:42:18 GMT -6
checked for voltage at the regulator coupler , between balack and green wire good voltage 12 volts ,checked green wire and ground with ohm meter good contact where is a good place to get a rectifier and is there a certan kind it takes ?
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on May 28, 2012 1:03:22 GMT -6
ok the yellow wires off the stator are getting 26 ac volts at idle and about 85 at 5000 rpm.now with the diode diconnected , just checking the output from the regulator by diconnecting the red wire from the regulator side of the reg couplerand using a volt meter with red connected to the regulator red wire and green to batt ground , im only getting about six 6 volts
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on May 26, 2012 14:42:59 GMT -6
ok with everything disconnected except regulator if i take the red wire out of the reg side of the coupler and put a dc voltage tester on the red and batt ground should nt i be getting like 13 or 14 volts ? but im not im only getting like 6 .4 , its a new regulator. is there a way to test it ?
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on May 17, 2012 19:21:47 GMT -6
still need help
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on May 15, 2012 20:20:24 GMT -6
could i set up a time like maybe sat. where someone could walk me thru the testing of the charging system ,while we were online
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on May 15, 2012 20:08:44 GMT -6
im still having trouble with this scooter charging , it has a new regulator on it ,i disconnected the red wire from the regulator coupler regulator side and connected volt meter to red wire and ground shouldnt i get like 14 volts but im only getting about 6 plz help me
|
|
