New Student
Currently Offline
Posts: 2
A+'s: 0
Joined: Aug 5, 2019 23:58:50 GMT -6
|
Post by whitelx1 on Aug 6, 2019 22:48:50 GMT -6
The kills witch is off? Does the bike kick start ok? I meant the kill switch is put to run not off |
|
New Student
Currently Offline
Posts: 2
A+'s: 0
Joined: Aug 5, 2019 23:58:50 GMT -6
|
Post by whitelx1 on Aug 6, 2019 0:03:34 GMT -6
I tried to jump my sons scooter and all of a sudden it stopped cranking. Right away I tried to start it off the relay and it started. I am mechanically inclined and I am stumped on this one.. I am not getting power out of the starter switch but there is a ground.
I switched the starter switch with the horn switch to see if that would help and same thing.
And yes I am pressing the back brake to compete the circuit .
I know some might say it is a broken wire but at this point not sure where to begin looking ..
Any ideas on this and is there a way to bypass the switch.
Also the kill switch is off, just wondering if there is a fast fix for this ..
Again no power to the starter switch .
Thanks Again
This is based off a GY6
|
|
