Tried to jumpstart a Jonway YY150T-12 and now will crank By whitelx1 (Read 360 times)

[whitelx1]

I tried to jump my sons scooter and all of a sudden it stopped cranking. Right away I tried to start it off the relay and it started. I am mechanically inclined and I am stumped on this one.. I am not getting power out of the starter switch but there is a ground.
I switched the starter switch with the horn switch to see if that would help and same thing.
And yes I am pressing the back brake to compete the circuit .
I know some might say it is a broken wire but at this point not sure where to begin looking ..
Any ideas on this and is there a way to bypass the switch.
Also the kill switch is off, just wondering if there is a fast fix for this ..
Again no power to the starter switch .
Thanks Again
This is based off a GY6

[cyborg]

The kills witch is off? Does the bike kick start ok?

[whitelx1]

Aug 6, 2019 8:03:24 GMT -6 cyborg said:

The kills witch is off? Does the bike kick start ok?

I meant the kill switch is put to run not off

[cyborg]

Id say either the hot feed coming into the start switch is bad or the switch itself is bad,,,,which we see here on the forums often

[crwford]

short out the selonid see iff start cranks start my be hung up.