New Student
Currently Offline
Posts: 19 
A+'s: 0
Joined: Oct 12, 2016 18:05:52 GMT -6
|
Post by mcnpam on Oct 13, 2016 8:39:32 GMT -6
Ok I will check all the fuses and I will try putting starter fluid in the crank.
|
|
New Student
Currently Offline
Posts: 19
A+'s: 0
Joined: Oct 12, 2016 18:05:52 GMT -6
|
Post by mcnpam on Oct 13, 2016 8:36:20 GMT -6
I double checked the owners manual and the recommended gap is 0.8
|
|
New Student
Currently Offline
Posts: 19
A+'s: 0
Joined: Oct 12, 2016 18:05:52 GMT -6
|
Post by mcnpam on Oct 12, 2016 18:41:01 GMT -6
I forgot to mention that this is not a EFI Kit. The Scooter was manufactured with a FACTORY INSTALLED EFI system. I should also mention that it was manufactured in China.
|
|
New Student
Currently Offline
Posts: 19
A+'s: 0
Joined: Oct 12, 2016 18:05:52 GMT -6
|
Post by mcnpam on Oct 12, 2016 18:31:03 GMT -6
I have a 150cc-EFI La Vita which was discontinued in 2011. I have a problem with it not starting. I have done the usual troubleshooting. Changed the battery, spark plug (gapped@ 0.78), solenoid switch and drains the gas tank (put in new high octane gas).
I am getting spark from the plug and the starter is turning. But it won't start. I don't know much about the ECU which controls the DC 4 pin CDI unit. And I don't have a service repair manual and can't get one because it's not made anymore. However, I have ordered a new CDI and waiting for it to arrive. But if I have spark, that is probably not the problem.
Can anyone make some suggestions?
|
|
