New Student
Currently Offline
Posts: 2
A+'s: 0
Joined: Jun 7, 2013 2:55:56 GMT -6
|
Post by jdlema on Jun 8, 2013 0:04:21 GMT -6
[replyingto=admin]JR[/replyingto]Thanks JR. I'm slowly getting it figured out. However I don't see anything that hooks up to water system that will fit that tiny port on the carb. Right now I have it plugged. Another stumper is I think I have a larger hose that attaches to the water neck housing and goes to the carbon vapor jug?? I hooked it up and no negative consequence so far. It is on the bottom side of the radiator cap so it should be flowing all the time.
Thanks again
JL
|
|
New Student
Currently Offline
Posts: 2
A+'s: 0
Joined: Jun 7, 2013 2:55:56 GMT -6
|
Post by jdlema on Jun 7, 2013 5:20:10 GMT -6
|
|
New Student
Currently Offline
Posts: 2
A+'s: 0
Joined: Jun 7, 2013 2:55:56 GMT -6
|
Post by jdlema on Jun 7, 2013 3:28:57 GMT -6
Brand new at this. 2010 YY250T jonway motor quit. Rebuilt and instralled. However I did not remove it and now have huge issues with all the hoses (vac, emission, water etc.) I think I have the vac figured out on the carb to fuel pump and the whatever keeps it from back firing on decel. Engine does start. First issue is water comes out of a port on the right side of carb?? What hooks up to that? Also the big hoses that come from the crankcase to the air box. Lots of ports on that thing.
|
|
