New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Apr 1, 2013 6:39:49 GMT -6
|
Post by mayom on Apr 5, 2013 8:17:12 GMT -6
Replaced/ pads and cleaned front and rear calipers, cant get them to work, handles wont bleed right... is there a secret i dont know about, have done it plenty of times on car? whats up with these? first time doing this on scooter Running great now I need to stop in traffic.....  just watched back bleeding method going to try it! |
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Apr 1, 2013 6:39:49 GMT -6
|
Post by mayom on Apr 5, 2013 8:10:33 GMT -6
[replyingto=admin]JR[/replyingto]found the 15 amp at relay, changed fuse, relay was shot (thats why fuse blown), replaced and running fine!
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Apr 1, 2013 6:39:49 GMT -6
|
Post by mayom on Apr 1, 2013 14:22:56 GMT -6
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Apr 1, 2013 6:39:49 GMT -6
|
Post by mayom on Apr 1, 2013 14:21:32 GMT -6
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Apr 1, 2013 6:39:49 GMT -6
|
Post by mayom on Apr 1, 2013 6:58:41 GMT -6
Installed new battery , motor cranked 3 times now no power anywhere, am mech. incline and have knowledge of bike, just turned 10,000 on scooter getting ready for new season, have no clue what happened? any suggestions... fuses good, traced power to starter ok, no power at ign switch??? I rely on bike for transportation, (gas mileage excellent) Motor great changed oil every 1000 miles have had electrical problems before easy fixes help!  |
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Apr 1, 2013 6:39:49 GMT -6
|
Post by mayom on Apr 1, 2013 6:46:08 GMT -6
no power at ign. switch |
|
