New Student
Currently Offline
Posts: 3
A+'s: 0
Joined: Dec 10, 2012 21:10:43 GMT -6
|
Post by robinord on Dec 12, 2012 0:21:06 GMT -6
Purchased voltmeter. Checked it on a disconnected charged 12V car battery and got the expected voltage of 12.3V.
The reading on the disconnected (dry cell) scooter 12V battery was high - 12.93V. When connected with the scooter turned on the reading went up to over 15. When the scooter was turned off again the battery read 13.2 volts, falling slowly thereafter.
From alleyoop that seems to mean there is a drain. But the high base level voltage is also odd. I will check the alarm. Any thoughts? Thanks!
|
|
New Student
Currently Offline
Posts: 3
A+'s: 0
Joined: Dec 10, 2012 21:10:43 GMT -6
|
Post by robinord on Dec 11, 2012 15:31:00 GMT -6
Thank you all! Now the proud owner of a multimeter. Will keep you posted ;
|
|
New Student
Currently Offline
Posts: 3
A+'s: 0
Joined: Dec 10, 2012 21:10:43 GMT -6
|
Post by robinord on Dec 10, 2012 21:15:57 GMT -6
I have a CF Moto EJewel 150 Very happy EXCEPT the battery never charges. Lots of trips to the charger. 3 batteries in two years. Is there a known distributer, CDI, or other problem such as the security setup I can vary to get the thing charging?
|
|