50cc exhaust bracket... WT......? By blitztek (Read 1,530 times)

[blitztek]

So I bought an exhaust for a customer, and it got here yesterday. Now what I cannot figure out is how this bracket works... I am really bad at puzzles but can rebuild an engine no prob. This thing has me stumped... Have any of you guys ran into this bracket before an how did you go about installing it?

.ebay.com/itm/Gy6-Performance-Steel-Exhaust-50-125-150cc-P-P-STYLE-/130629561794?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item1e6a20edc2" rel="nofollow" target="_blank">.ebay.com/itm/Gy6-Performance-Steel-Exhaust-50-125-150cc-P-P-STYLE-/130629561794?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item1e6a20edc2

not the one I bought but same bracket

[scooterelements]

Not sure if this will help but kinda looks like the one i sell in the picture. Hope it helps

[blitztek]

thanks for the pic, I wish it was that good, but on this bracket, none of the holes line up with the case. i built a support bracket, hope it holds

[JR]

Hey Blitz, where ya been lately? I went and looked at the muffler system on my 50cc and "if" this bracket would work at all it would need to be bolted up where the two now exisitng muffler bracket bolts are and that would leave one hole left on the new muffler bracket arm to bolt the circle clamp up to after you installed it on the muffler.

Lots of these come with brackets but more times than not people end up fabricting their own.

JR

[cruiser]

I made a bracket from 2 pieces of flat aluminum stock. I used some old sockets from a cheap Chinese socket set for the spacers.

[blitztek]

cruiser that is a NICE setup, I would polish them if i were you!

JR the problem I ran into was that the stupid holes won't reach the motor, they are skewed the wrong way. anyways, I will snap a pic of my "work" on tuesday

oh and where I have been is rattifying my Milano. She's comin together. Maybe I will have some pics on tuesday of her!

[JR]

Maybe I will have some pics on tuesday of her.



JR

[blitztek]

teaser

[scooterelements]

Last night i got a shipment of parts and i got a few of these exhaust systems in it and the first thing i thought of was this post after seeing the mounting bracket.

[alleyoop]

Is that a 1 1/4 pipe or 1"?
Alleyoop