|
|
Post by scooterelements on Jan 18, 2012 13:40:50 GMT -6
SRP 6mm Stroke Crankshaft with A200 rod. This is the same crankshaft that is being used at the drag strip all over Puerto Rico. For only $199.99 it comes with a Longer timing chain and a cylinder spacer at no extra charge! and of course Free shipping. buy direct on my site Also have available the 3mm stroke crankshaft and 4mm stroke crankshaft all available on my website at .scooterelements.com" rel="nofollow" target="_blank"> .scooterelements.com at super low prices! No one beats these prices online for these parts!  |
|
|
|
Post by rapidjim on Jan 20, 2012 14:20:20 GMT -6
Nice Crankshaft. Now where was that crank when I was building Alley's 150?  Jim |
|
|
|
Post by alleyoop on Jan 20, 2012 17:04:18 GMT -6
YEA!! WHAT THE HEY JIM  , what would that have done for my bomb jim? Alley |
|
|
|
Post by scooterelements on Jan 21, 2012 7:56:36 GMT -6
Nice Crankshaft. Now where was that crank when I was building Alley's 150? Jim LOL you know i dont ever see crankshafts higher than 3mm on any website except for Taida which they are located in Taiwan they have up to 8.2mm crankshaft. I want one LOL |
|
|
|
Post by rapidjim on Jan 21, 2012 8:22:42 GMT -6
YEA!! WHAT THE HEY JIM , what would that have done for my bomb jim? Alley Larger Stroke, more displacement, more power LOL |
|
|
|
Post by alleyoop on Jan 21, 2012 13:03:16 GMT -6
DAMN JIM !! We maybe could have made it do WHEELIES...LOL
Alleyoop
|
|
|
|
Post by scooterelements on Jan 24, 2012 8:28:43 GMT -6
LOL i person running this 6mm Stroke Crankshaft and Nitromethane flipped his scooter at the drag strip a couple of months ago. Dude should have invested in a wheelie bar lol
|
|
|
|
Post by rapidjim on Jan 24, 2012 9:10:41 GMT -6
DAMN JIM !! We maybe could have made it do WHEELIES...LOL Alleyoop That is my goal, build a 150 trike to do wheelies and race it at the scooter drags. Oh wait, they don't allow trikes. LOL Jim |
|
|
|
Post by scooterelements on Jan 24, 2012 11:00:55 GMT -6
DAMN JIM !! We maybe could have made it do WHEELIES...LOL Alleyoop That is my goal, build a 150 trike to do wheelies and race it at the scooter drags. Oh wait, they don't allow trikes. LOL Jim Really they dont allow trikes? Well i have only seen one trike around here but i did not know that they do not allow trikes at the drag strip. Why dont they? |
|
|
|
Post by rapidjim on Jan 24, 2012 11:22:19 GMT -6
We need to get your trike to do this Alley
|
|
|
|
Post by scooterelements on Feb 13, 2012 9:59:33 GMT -6
WE HAVE 3mm,4mm,6mm with forged rods! at the best prices online!
|
|
|
|
Post by justbuggin2 on Feb 13, 2012 10:51:34 GMT -6
ok now what i need to know is what is the over all stroke length of the stock and i then can add the 6mm this with a 63mm bore would be at 200cc true displacement?
|
|
|
|
Post by scooterelements on Feb 13, 2012 11:43:45 GMT -6
ok now what i need to know is what is the over all stroke length of the stock and i then can add the 6mm this with a 63mm bore would be at 200cc true displacement? I have actually never measured the displacement after install. but that 6mm is not easy to install. Most use it for racing only. it requires a spacer and machining the piston and a longer timing chain. For street most go for the 4mm or 3mm |
|
..BAD TO THE BONE..
