New Student
Currently Offline
Posts: 24
A+'s: 1
Joined: Mar 30, 2014 7:52:18 GMT -6
|
Post by colonelangis on Jun 9, 2015 11:02:57 GMT -6
I think it would be helpful to all riders if members could post their jet sizes (both main and pilot) along with their elevation and mods to a base list. Giving newcomers a starting point according to elevation is key to a smoother running scoot. If you look at most of the questions...this always comes up at some point and boy does it take a long time to get this info. Sure there may be some tweaking since we all live in different parts of the country...but a list such as the example I'm giving below would save everyone alot of time
2014 TAO TAO EVO 150cc gy6 (ATM150) EMISSIONS/PAIR SYSTEM ALL REMOVED PMC RACETECH EXHAUST/FREE FLOW FILLER STOCK MOTOR / NCY TRANS STOCK 24 mm CARB ELEVATION 215 FT ABOVE SEA LEVEL / EAST COAST/ MASSACHUSETTS MAIN JET 120 PILOT 38
So when you stop by for help here. .kindly take a moment to contribute to the list so the threads won't have to be roamed for hours I think easier access to this info would help a lot of people
|
|
New Student
Currently Offline
Posts: 43
A+'s: 5
Joined: Aug 20, 2014 8:58:25 GMT -6
|
Post by rks on Jun 19, 2015 6:55:45 GMT -6
2011 Jonway with 157QMJ Long Case Emissions removed durning PDI K&N Cone Filter, 115 Main, 35 Pilot No other mods to engine or electrics Operating Elevation 500ft to 2000ft Other factors are probably more meaningful than elevation, at least until you get to 4000 feet. The library section here, has lots of good info.....such as this link rejetting basics
|
|