New Student
Currently Offline
Posts: 2 
A+'s: 0
Joined: Nov 24, 2014 11:57:11 GMT -6
|
Post by duke12 on Nov 24, 2014 14:50:06 GMT -6
I have a Dongfang DF50STF. When I tried pulling my key out of the ignition the entire cylinder/Mechanism came out as well. No wires attached, just the cylinder. How can I fix this?
|
|
|
|
Post by alleyoop on Nov 24, 2014 15:26:20 GMT -6
WOW!! That is Dongfang quality alright(HAHA). Well you have two choices IF the cylinder will go back in and reconnect inside to rotate properly and make contact with the base contacts right you can then figure out something on top so the cylinder does not come out again. OR you will need to get a new ignition set with new keys.
|
|
|
|
Post by rapidjim on Nov 25, 2014 7:44:26 GMT -6
Trying to get a new ignition switch and lock set for a DongFang may be a bit of a chore. Parts for these machines are hard to come by that is one of the reasons that Ice Bear quit offering them a couple years ago. The only place I know of to get Dong Fang parts was Sunny Sports, good luck with that.
What you can do is remove the complete ignition lock assembly and compare it with lock sets from different trikes/scooters. Depending on what style it is I may be able to help you but I will need pictures of all sides and the wiring connector.
|
|
New Student
Currently Offline
Posts: 2
A+'s: 0
Joined: Nov 24, 2014 11:57:11 GMT -6
|
Post by duke12 on Nov 26, 2014 8:43:26 GMT -6
Thank you for the tips.
|
|
..BAD TO THE BONE..
