Kick start lever, Qj1e40qmb interchangeable? By jumpinjohn (Read 489 times)

[jumpinjohn]

Hi,

I have a strpped out lever and need a replacement.  The one that came on this model is not very well made.  Seems like a soft aluminum.  Anyone know if I can use a different type?

The kick starter may get a lot of use, because I cannot locate a correct replacement starter. (looked at hundreds, see other thread.)

Here's what the lever I have looks like.

[alleyoop]

It really does not matter as long as it fits on the shaft and the length so it does not hit anything.
Alleyoop

ALSO ON THE STARTER the 9 or 10 teeth starter will work just fine. if you currently have a 10 tooth starter and you get a 9 tooth starter the 9 tooth starter will turn the gear just a hair slower is all.
Using the 10 tooth starter it will turn the gear just a hair faster is all.