jonway master 2 dead By tavcor (Read 284 times)

[tavcor]

hi i need some advice I've got a 250cc Jonway vertical engine. i recently replaced the head and cylinder gasket on my scoot. electrical wise i only remove the battery and selonoid cables after top assembly i refit the cables but now no power scoot is dead i've checked the battery(good). bridge the connections on selonoid engine turns good. checked the 4 fuses in fuse box with meter all good. the diagram shows a 15amp fuse on positive battery to ignition switch but mine got only cable from positive battery to one contact of selonoid then other selonoid cable to starter.

[alleyoop]

You are missing a small RED WIRE going to the POSITIVE TERMINAL on the battery that feeds the IGNITION SWITCH that is the wire that has the 15amp fuse. So it is lying there someplace and you need to put it on the POSITIVE post of the Battery along with the THICK RED WIRE that goes to one of the SOLENOID terminals and the other to the STARTER.
Alleyoop