Rear wheel bearing info By wheezy (Read 323 times)

[wheezy]

I've got a new problem on my JCL 250A.  Over the last couple days, I've noticed an uneasy 'kick' when cornering.  It appears the rear wheel is loose.  It has about a half inch play when you attempt to rock it while on the center stand.  It doesn't move left and right on the shaft, the spacer is intact and the nut is still tight.  It looks like the bearing on the side facing the clutch may be shot.

I still have to make it home this evening, then I will take it apart to verify it is indeed the bearing.  Assuming it is, does anyone have any info on these bearings like size, part number, etc.  I would prefer not to mail order it, so if anyone has gotten an equivalent at the local parts store, that'd be great.

[richardthescooter3]

check that area too It could be the bushing under the seat, two bushings, one on each side

[wheezy]

Well, the news is not good. The bearings in the swing arm and gearbox are in good shape. What is not in good shape is the rear wheel. The splines on the brake disk side are worn to almost nothing. The other side is still good, but it'll eventually go as well. The shaft splines are good. Might as well change the wheel now vs. later, since I don't want to end up stranded.

I have seen the link in the parts thread. The price is a little steep for my budget. Where has everyone gotten their replacement rear wheels?