Electrical Help Ignition! By churchy (Read 410 times)

[churchy]

Ok so first thread, first problem, when i turn the key in the ignition to on i get no power to anywhere, lights, horn, dash, nothing. Therefore my electric start wont work! However one the engine is running (via the kicker) everything works including starter motor! I just dont know what to do about this or where to start, electrics are really not my thing!
any help would be much appreciated.

Cheers


Yamaha Jog r/MBK Mach G 03
Stage 6 Street Race 70cc
Stage 6 Pro Variator
Stage 6 Pro Rep Pipe
Home Made Truck Horn

[alleyoop]

Check the fuse on the red thin wire hooked up to the Positive Post of the battery. If its a TUBE type fuse change it they may look good but are bad on one of the ends which you cannot see.
Alleyoop

[churchy]

it is a blad fuse and using 7.5 A its what it says to use in manual, changed it, still nothing.

[alleyoop]

BUMMER, thought it was going to be an easy fix. Well now you have to test the IGNITION and see if it is getting 12v from the battery. The ignition always has voltage from the battery and when the KEY is turned on it sends the voltage to alla the gauges and instrument lights etc.. So it could be a bad Ignition switch IF it is getting voltage from the battery.
Alleyoop

[alleyoop]

Let me ask DID IT EVER work, or when did it go bad Maybe it got caught in the rain etc.. or did you dump it etc..
Alleyoop

[churchy]

ok so the day i recieved the ped electric start worked...then after the first use nothing.. thought it blew fuse but didnt know where fuse was so didnt look, too it back to garage he put a 15 amp fuse in it worked electric start once then nothing i moved back to 7.5 still nothing, i have a multimeter, can you describe to me the wires i should be testing off the top of your head and the process i would go about using?