Roketa 250C Linhai Leaks oil around water pump By robert1c (Read 689 times)

[robert1c]

Hi Guys,

I have an issue with my Roketa 250C Linhai leaking oil around water pump. On the motor there is a little pin hole that seeps oil i assume to lube the water pump. it seems that the water pump is possibly not seated correctly OR there should be a gasket/seal that should be there.

Has anyone else run into this problem and if so how can i go about fixing this?

Thank you in advance for your help.

[robert1c]

Well i know why it was leaking so bad. I broke one of the mounting arms so it wasn't seating correctly. but prior to that had slow leak so they question still stands should there be an O-ring and/or gasket between the pump and the motor?

Thanks all for your help.

[JR]

Sept 22, 2013 10:38:27 GMT -6 robert1c said:

Well i know why it was leaking so bad. I broke one of the mounting arms so it wasn't seating correctly. but prior to that had slow leak so they question still stands should there be an O-ring and/or gasket between the pump and the motor?

Thanks all for your help.

The Yamaha YP250 Majesty manual give a complete part/photo break down of the water pump on page 151.




thescooterprofessor.proboards.com/thread/265/yamaha-manuals


JR