Post by rideon1946 on Sept 16, 2013 11:41:59 GMT -6
Hi all,I have no spark at plug,have checked coil by replaceing,also replaced CDI,went over all the connection's,only has 3 fuses,all good,checked the stator to see if it was grounded to motor,not grounded to motor.I am thinking it is a bad pick up coil.It ohmed 203 ohms from blue wire to yellow.That sounds high but dont know what it should read.If anyone out thier knows it would be a great help to me.Also what voltage should I receive through the PU coil wires while the motor is turning over.Thanks for any help.