New Student
Currently Offline
Some Assembly Required
Posts: 22
A+'s: 0
Joined: Jul 21, 2012 5:56:03 GMT -6
|
Post by bennypuff231 on Apr 9, 2013 9:40:59 GMT -6
Hey everyone, I have a 2011 Jonway YY250T and one of the brake lights is loose, what is the easiest way to get to and replace/reconnect it? Any help would be much appreciated!
|
|
Junior
Currently Offline
Posts: 138
A+'s: 0
Joined: Aug 7, 2012 8:24:21 GMT -6
|
Post by wheezy on Apr 9, 2013 10:27:16 GMT -6
I don't know if you have the same setup as my JCL 250, but I get to my tail lights through a cover located inside the underseat storage. Two 10mm screws and it pulls right out.
|
|
New Student
Currently Offline
Some Assembly Required
Posts: 22
A+'s: 0
Joined: Jul 21, 2012 5:56:03 GMT -6
|
Post by bennypuff231 on Apr 9, 2013 13:06:17 GMT -6
Perfect that was all it was thank you!!
|
|
|
|
Post by alleyoop on Apr 9, 2013 13:11:13 GMT -6
 Alleyoop |
|
New Student
Currently Offline
Posts: 1 
A+'s: 0
Joined: Sept 8, 2014 18:44:12 GMT -6
|
Post by mektah on Sept 8, 2014 18:46:08 GMT -6
My brake light cover is pretty dirty, and turn signal lights, is there a way to clean them remove them without removed the body panels?
|
|
|
|
Post by ellpee on Sept 9, 2014 7:56:36 GMT -6
Don't think so. I had to pull the rear plastic on my Roketa once, and the taillight unit was still firmly attached, and as I recall there would have been no way to remove it without first removing the "fenders."
|
|
..BAD TO THE BONE..
