New Student
Currently Offline
Posts: 21
A+'s: 2
Joined: Mar 15, 2013 11:11:41 GMT -6
|
Post by kieth95 on Mar 15, 2013 13:49:31 GMT -6
i have the lifan lf50qt-2a and it wont spark and i think its because a few wires not being hooked up on the front by the battery i cant find where they connect to.. can anybody post pics of their scooter wiring or just tell me where they hook up?
|
|
Sophomore
Currently Offline
Posts: 79
A+'s: 0
Joined: Feb 13, 2013 5:10:42 GMT -6
|
Post by beakeyozz on Mar 15, 2013 13:59:38 GMT -6
A few how many is a few l would be better if you could post some pics of your wireing
|
|
New Student
Currently Offline
Posts: 21
A+'s: 2
Joined: Mar 15, 2013 11:11:41 GMT -6
|
Post by kieth95 on Mar 15, 2013 14:19:34 GMT -6
i have some more pics butg heres one Attachments:
|
|
New Student
Currently Offline
Posts: 21
A+'s: 2
Joined: Mar 15, 2013 11:11:41 GMT -6
|
Post by kieth95 on Mar 15, 2013 14:43:46 GMT -6
second one Attachments:
|
|
New Student
Currently Offline
Posts: 21
A+'s: 2
Joined: Mar 15, 2013 11:11:41 GMT -6
|
Post by kieth95 on Mar 15, 2013 14:45:17 GMT -6
last one Attachments:
|
|
|
|
Post by alleyoop on Mar 15, 2013 15:18:43 GMT -6
Take a picture of your CDI to see if any wires are missing from it. Usually small green wires are GROUND.
Alleyoop
|
|
|
|
Post by alleyoop on Mar 15, 2013 15:22:37 GMT -6
Here is your normal CDI connections and what they do. Color of the wires may be different on some scoots but it all depends WHERE the wires are coming from that go into the SAME LOCATION of the CDI the positions on the CDI ARE CONSTENT. Alleyoop  |
|
New Student
Currently Offline
Posts: 21
A+'s: 2
Joined: Mar 15, 2013 11:11:41 GMT -6
|
Post by kieth95 on Mar 15, 2013 15:30:30 GMT -6
there all hooked up here but i think the problem is those red and green wires in the first pic but yet i have no idea where any of them plug into Attachments:
|
|
New Student
Currently Offline
Posts: 21
A+'s: 2
Joined: Mar 15, 2013 11:11:41 GMT -6
|
Post by kieth95 on Mar 15, 2013 15:32:48 GMT -6
every thing cranks over and has good compression but no spark and i already check the ignition coil i know its good so thats why i think its these wires
|
|
|
|
Post by alleyoop on Mar 15, 2013 22:45:55 GMT -6
Trace that Green wire on the last picture that may be the Trigger coming from the PICK UP COIL above the Flywheel.
The two wire plug may be the ENRICHER PLUG coming from the Harness, also tape up that bare black and white wire going to the plug if that carries voltage and touchs metal it will cause a short and it will not start.
Also trace that PINK WIRE need to know where they are coming from that will tell what they are for and what they do.
Alleyoop
|
|
|
|
Post by tvnacman on Mar 16, 2013 3:44:19 GMT -6
the first pic look like they go to the coil . I don't see the coil or the plug wire .
I bet the green wire with the brade on it is for a ballast resistor . The black with white stripe and green , I'm thinking kickstand switch harness .
John
|
|
..BAD TO THE BONE..
