Rear Axle / shaft or bearing ? By liammcl (Read 911 times)

[liammcl]

Hi,
I have inherited a moped (2002 Italian Siamoto Birdie 50cc)
which has been stood in someones garage for 11 years !

Amazingly, cleaning the spark plug and carbs have sprung it back into life.

However, there is a wobble in the back axle, it moves in and out, and less so to the side.

Is this a pretty major fix? bearings etc?

Many Thanks
Liam

ps Here are 2 videos of the movements
s103.beta.photobucket.com/user/liammcl_2006/media/delmas%20moped/wobblelh_zps3e623e7d.mp4.html

s103.beta.photobucket.com/user/liammcl_2006/media/delmas%20moped/wobbleh_zpsa7192e56.mp4.html

Attachments:

[tvnacman]

with the wheel mounted does it still have that play ?

John

[liammcl]

Thanks for replying John,
I've found that it is indeed the bearings, the cage had totally disintergrated
...dunno where the bearings have gone..
this is all that is left of the cage (in the foreground)
i103.photobucket.com/albums/m147/liammcl_2006/delmas%20moped/CIMG6800_zps6a9a7a0d.jpg

and there is no bearings at all in there
...I didn't take anything out...that is how it was !

s103.beta.photobucket.com/user/liammcl_2006/media/delmas%20moped/CIMG6802_zps29c4c125.jpg.html?sort=3&o=1

I have to try and work out what is supposed to be in there...1 set of bearings or two etc

The splines have small chunks missing too...it has had better days !

[tvnacman]

maybe the old owner had it opened and could not fix it .

John

[liammcl]

Thanks Guys,
ps Just in passing it was parked up, because the lady banged into something and broke the throttle casing on the handlebar...

What I thought was the bearing cage, isn't !
There were no loose bearings anywhere...

Comparing the axle and cage ,
there is no room for ballbearing to go inside it and the shaft.

the 2 holes
i103.photobucket.com/albums/m147/liammcl_2006/delmas%20moped/CIMG6802_zps29c4c125.jpg

Anywho, it is good to tinker and see how all the bits fit together if nothing else.

Cheers
Liam

[liammcl]

just an update...

A bit of a result...there is a stamp "hk222812"
which is this
trade.indiamart.com/details.mp?offer=3764990759
so I am getting there.

Thanks for all your help !

I'm guessing that a new one of these needle bearing cage would do the trick on the clutch side, the wheel side has ball bearings

I hope all that's needed is the needle cage...

Here's one for a fiver delivered!
simplybearings.co.uk/shop/p555342/HK2212+Budget+Drawn+Cup+Type+Needle+Roller+Bearing+Open+End+Type+22x28x12mm/product_info.html

Cheers
Liam