Junior
Currently Offline
Posts: 150
A+'s: 0
Joined: Jul 8, 2011 8:03:23 GMT -6
|
Post by scooterran on Jul 24, 2011 16:43:58 GMT -6
Got home the other night and getting off my scoot I noticed a loud rattle. looking for the problem, I thought I would put the scoot on the center stand to check it out. I found out that it was the bushing and the nut and bolt were completly gone from the center stand. Oh ! 250-B and red Please help with the part # for both of these. Just trying to pass a stone  . First one Scooterran |
|
Junior
Currently Offline
2008 Roketa MC54B-257 (10,000 Miles) and counting
Posts: 215
A+'s: 1
Joined: Jul 6, 2011 16:47:54 GMT -6
|
Post by bhinch on Jul 24, 2011 17:13:31 GMT -6
Which scoot do you have........... are you missing the bolt & nut that holds the center stand on the scoot or the rubber cushion(wheel)...that keeps the center stand off your engine... ..... I had to replace the wheel on mine because of half of it missing...allowing the center stand to contact the bottom of the engine...very loud rattle/knock ... this fixed the problem which I thought was the CVT....Variator....Clutch...Belt... after I removed the cover and looked.... try .roketa.com" rel="nofollow" target="_blank"> .roketa.com .....enjoy the ride... |
|
|
|
Post by JR on Jul 24, 2011 17:56:54 GMT -6
|
|
Junior
Currently Offline
Posts: 150
A+'s: 0
Joined: Jul 8, 2011 8:03:23 GMT -6
|
Post by scooterran on Jul 24, 2011 19:42:53 GMT -6
Yes, the rubber bushing that hits the bottom of the motor. Bolt and bushing completely gone. Just wondering what size ? I ride a MC-250-B Just like the Professor.
Ever have a kidney stone attack while ridding a scoot ? Not fun !!!!! And hurts like HELL !
|
|
