Bad wire??? By 04prixgt04 (Read 1,516 times)

[04prixgt04]

cool

[justbuggin2]

tvnacman has the parts you will need to go with the 11 pole stator setup at great prices i done the swap on my bike and have great results here is how i wire my system up

[04prixgt04]

my stator is good. id like to get my setup working before i upgrade. That and I don't need it til I am ready for gps and hid's in the future.

at jr - got called in early and stayin late so ill get you those readings tomorrow i hope. thanx

[04prixgt04]

it was a loose ground connection at the connector where is the headlight system plugs into the stator. Basically what I did was I cut both connectors off and just soldered the wires together and boom head lights bright as hell real nice .... ::::

[JR]

Awesome! Hey I did try to call this a.m before I read this post. Been going to bed ealier with this foot but if you need help don't hesitate to call and BTW I don't charge for helping forum members.

JR

[04prixgt04]

so ..... 1 block down the road after i said i fixed the issue they went out again. I have been so busy i havent had a second to mess with it. I went ahead and got a brand new complete 3 piece wireharness w/ connectors for an 11 pole stator / R/R (tail light harness, enginge harness and guage/ switch harness), an 11 pole stator, flywheel, and 11 pole R/R . I got all this for 100 shipped. everything is in brandnew condition and the harness connectors fits everything perfectly except the clock. there is no connector for that. I still need to put the stator on and finish putting the body back together but i will let yall know. I am hoping that with every wire on the bike new and all new electrical parts including cdi, starter relay, and igniton coil I wont have anymore wires short out =)

[alleyoop]

WOW!! MERYY XMAS to someone Good luck 04prixgt hope it all works great for a change and give you a break so you can enjoy the damn thing.
Alleyoop

[04prixgt04]

FIXED!!!!!!!!!!!!!!!!! new 11 pole and R/R and harness installed. (lots of issues with switched. horn started it blinker was on/off for lights. but using old harness and patients and trail and error, i got it all in order. ended up doing a little splicing but nothing too big. just lighting stuff. i have lots a pics and vids of everything too if any1 wants to see. the flywheel/stator was EZ w/ the rope trick and i think i may have a little more power now. .... next air filter and hid's.... merry xmas peeps

[alleyoop]

CONGRATULATIONS 04PRIXGT04 GOOD JOB BRO!!
HECK YEA!! put up all the pictures you have and VID so others can benefit from what you did.
Now you know what the heck to do if someone wants to do the same thing and you can help them.
Alleyoop

[04prixgt04]

Here are the pics. i wish i would have taken them more in line with the order of what i did. i will add vids soon and make a vid showing the trial and error of getting the controlls all right.

i pretty much did everything in the dark with my phone for a light. it was the only time i had to work on it.. She is still running great with light!!!

s455.photobucket.com/albums/qq271/ducatidrew/my%20scooter%20and%20work%20preformed%20on%20it/

[JR]

Congrats! Drew! For sure you can direct anyone on this install now. Next time I see someone in need of help on this, I'm a calling on you to direct here and everyone else needs to step back and listen!

Happy New Year!

JR

[04prixgt04]

thank you Jr. Yes I'm confident now that I know my scooter inside and out and will not need to call on help anymore. Unless it comes to the stupid piece that is on the right side of the front wheel if you're facing the front of the bike. I think it to hooks up to the speedometer cable. It is cracked I don't know what it's called and I'm sure it's fine but I'd like to change it out anyways. I am about to change the CDI ignition coil and the starter relay. Got a good deal for 14 bucks for all 3 ships for free. Any who I wish I knew a little bit more about hooking up extra electronics. Now I have the 11 pole I'm not running much other than the headlights that are high powered .I'm sure that somehow I could fit a couple more things. I do have 2 light bulb wires that were supposed to going to the dash lights that were not used. They read about 12 volts each DC with the engine at idle. Can use be used to hook up a small radio or maybe a GPS? Thanks JR let me know what you think. Happy New Year to you also.

[JR]

I would run a radio on a seperate switch right off of the battery. Happy New Year to you also.

JR

[alleyoop]

That is what I did on mine and it is only an 8 pole stator. I have a wire going to an OFF/ON toggle switch then to my Radio. The Radio has a Clock on it and do not want it to drain my battery when not in use. Works great while going for a ride hit the toggle switch and radio on and no problems.
Alleyoop

[04prixgt04]

and it is on it's own curcuit right off the battery? nice. project for this weekend