New Student
Currently Offline
Posts: 16
A+'s: 0
Joined: Sept 28, 2012 13:03:22 GMT -6
|
New motor
by: ccortus - Nov 4, 2012 11:14:46 GMT -6
Post by ccortus on Nov 4, 2012 11:14:46 GMT -6
My scooter is broken (driveshaft bearings) and I was thinking of buying a new motor. The broken engine is a 139qmb and I was curious if I could put a larger motor into it without having to mod a whole bunch of stuff? Are there larger motors that will "bolt on" to the current frame setup?
2008 Taizhou Chuanl or Longbo 49.5cc
|
|
|
|
New motor
by: JR - Nov 4, 2012 16:46:25 GMT -6
Post by JR on Nov 4, 2012 16:46:25 GMT -6
All depends on the mounts of course. What one needs to do is measure each mounting place and then see if the engine you're looking at has the same setup? Your engine is the GY-6 of course as is the larger bores but from what I've gathered there are two different mounting schemes on this engine. Wiring, CDI, R/R should be no issue.
JR
|
|
