New Student
Currently Offline
Posts: 44
A+'s: 0
Joined: Sept 10, 2011 15:23:42 GMT -6
|
Stumped
by: kczukiman - Jul 19, 2012 17:38:02 GMT -6
Post by kczukiman on Jul 19, 2012 17:38:02 GMT -6
Still waiting for cooler weather befor opening the garage door. 104 is too hot. I did for the heck of it put a new belt and 12g rollers on . no change. If this turns out to be bad gas?  Vacuum check on hold |
|
|
|
Stumped
by: JR - Jul 19, 2012 19:11:31 GMT -6
Post by JR on Jul 19, 2012 19:11:31 GMT -6
104F? Man why aren't you out working on this thing?  Heck it's that hot here in the shade!   Know exactly how ya feel, I've got some routine maintenance to do on mine and about noon is all I stay out. Only getting down to mid 80's here in the night! I hate summer!  JR |
|
New Student
Currently Offline
Posts: 44
A+'s: 0
Joined: Sept 10, 2011 15:23:42 GMT -6
|
Stumped
by: kczukiman - Jul 19, 2012 21:05:32 GMT -6
Post by kczukiman on Jul 19, 2012 21:05:32 GMT -6
Their sayen 110 by next Tuesday.Ive never seen anything like this. Keeps up and I'm selling out and moving to Arizona!
|
|
|
|
Stumped
by: justbuggin2 - Jul 19, 2012 23:32:19 GMT -6
Post by justbuggin2 on Jul 19, 2012 23:32:19 GMT -6
what was the reason for the new carb it could be jetted def than the old one and that will cause issues
|
|
New Student
Currently Offline
Posts: 44
A+'s: 0
Joined: Sept 10, 2011 15:23:42 GMT -6
|
Stumped
by: kczukiman - Jul 20, 2012 16:48:43 GMT -6
Post by kczukiman on Jul 20, 2012 16:48:43 GMT -6
In the past 8 years we have owned several scooters,Quads, motorcycles, and have accumilated a lot of stuff, a carb being one of many items. So I threw it on just to see if it made any difference. After doing different adjustments to the other carb.
|
|
New Student
Currently Offline
Posts: 44
A+'s: 0
Joined: Sept 10, 2011 15:23:42 GMT -6
|
Stumped
by: kczukiman - Jul 21, 2012 8:44:45 GMT -6
Post by kczukiman on Jul 21, 2012 8:44:45 GMT -6
Ok,
I just done a vacuum test between manifold and carb. At the best carb ajustment the needle sputterd between 21-25. Couldnt get a steady needle. Is this ok ?
|
|
|
|
Stumped
by: cruiser - Jul 21, 2012 11:04:33 GMT -6
Post by cruiser on Jul 21, 2012 11:04:33 GMT -6
That is a very good vacuum reading. The reading is jumpy because it is a single cylinder engine so the quage is reading the pulsing vacuum. More cylinders = smoother vacuum. This pulsing vacuum characteristic is necessary for vacuum fuel pumps that are found on some of these engines.
|
|
New Student
Currently Offline
Posts: 44
A+'s: 0
Joined: Sept 10, 2011 15:23:42 GMT -6
|
Stumped
by: kczukiman - Jul 21, 2012 15:54:08 GMT -6
Post by kczukiman on Jul 21, 2012 15:54:08 GMT -6
Put it all back together, did a quick after break down detail cleaning on it and took it for a ride. Its running great. Good take of and top end. Now what fixed it ? The roller weights new belt or heet in the gas tank (Bad Gas) ? ?Lol one of those three take your pick. Thanks for all the replies. I once again have a happy wife!  |
|
|
|
Stumped
by: tvnacman - Jul 21, 2012 16:13:57 GMT -6
Post by tvnacman on Jul 21, 2012 16:13:57 GMT -6
good deal when the wife is happy life is good !!!!!!!
when you connected the vac gauge what was the vac reading before adjusting ?
John
|
|
New Student
Currently Offline
Posts: 44
A+'s: 0
Joined: Sept 10, 2011 15:23:42 GMT -6
|
Stumped
by: kczukiman - Jul 22, 2012 13:11:23 GMT -6
Post by kczukiman on Jul 22, 2012 13:11:23 GMT -6
good deal when the wife is happy life is good !!!!!!! when you connected the vac gauge what was the vac reading before adjusting ? John 19-23 ish |
|
|
|
Stumped
by: tvnacman - Jul 22, 2012 13:42:42 GMT -6
Post by tvnacman on Jul 22, 2012 13:42:42 GMT -6
You were close
John
|
|
