New Student
Currently Offline
Posts: 15
A+'s: 0
Joined: Feb 14, 2012 12:41:24 GMT -6
|
Post by roboscoot on Jul 10, 2012 22:07:06 GMT -6
 .....just changed oil went from dino to mobile synthetic....did one previously with no problem.....rode for a couple of days locally and no problem.....today....took a longer ride and on the way home "oil service" light went on.....this is different than the oil can/graphic light that turns on and than off once the scooter starts.... checked oil level when i got home....looked to me to be a tad low....so i added about 5 ounces...started up turned off.....turned key on again and oil service light still on.....the scooter takes 1'5 liter of oil....pressure is fine as is power...scooter running great... but i can't get the oil service light to shut off and i am reluctant to put more oil in as i don't want to over fill anybody here have any idea whats going on the scooter just hit the 5000 km service mark which calls for an oil change did my self with new oil filter.....scooter is less than a year old....i will be calling the dealer tomorrow to see if i can get any suggestions like i said this is my second oil change i did the first one myself....with no complications ......there has been no oil loss, the oil is at the top of the hatched part of the dip stick/cap.......what in the world is going on?
|
|
|
|
Post by tvnacman on Jul 10, 2012 22:24:52 GMT -6
disconnect the battery for five min see if it goes away . It could be set to go on by milage . Your best be would be to get scanning software and scan the obd .
John
|
|
New Student
Currently Offline
Posts: 15
A+'s: 0
Joined: Feb 14, 2012 12:41:24 GMT -6
|
Post by roboscoot on Jul 11, 2012 19:51:19 GMT -6
was able to reprog through the adj mode...so its gone now thanks again
|
|
|
|
Post by tvnacman on Jul 11, 2012 20:01:28 GMT -6
Rob , show us how to get to program mode or reprogram mode .
what code did it give you ?
John
|
|
