Sophomore
Currently Offline
Fear leads to anger. Anger leads to stress. Stress leads to doobies. And doobies lead to twinkies
Posts: 66
A+'s: 1
Joined: Jul 11, 2011 16:18:41 GMT -6
|
Post by scooteraddict on May 19, 2012 18:45:40 GMT -6
I have a MC54-250B and something doesn't seem right. Now, just so that you guys and gals go off on a tangent about the Carb or fuel issue, I have confirmed that I'm running just to the rich side by a wide band o2 sensor.
Now what I need your opinion about is that I can't seem to get by 250 past 6k rpms. Do you think that this might be due to to a rev limiter? Has anyone else experienced this as well?
I was thinking to upgrade to a performance coil and or CDI. Has anyone done such an act? If so, with what brand and what results?
|
|
|
Post by richardthescooter3 on May 19, 2012 19:03:51 GMT -6
|
|
|
Post by JR on May 19, 2012 21:08:08 GMT -6
How many miles on it? Last time you adjusted the valves? I run about 60 MPH @ around 6500 rpm.
JR
|
|
Sophomore
Currently Offline
Fear leads to anger. Anger leads to stress. Stress leads to doobies. And doobies lead to twinkies
Posts: 66
A+'s: 1
Joined: Jul 11, 2011 16:18:41 GMT -6
|
Post by scooteraddict on May 20, 2012 6:15:35 GMT -6
The valves were done less then a thousand miles ago.
I was running 6k at 65mph. I'm looking to get that extra bit of speed out of the engine so that I can hit that Max torque out of the engine..
Can the corona spring be to strong?
|
|