|
|
Post by alleyoop on May 18, 2012 21:27:49 GMT -6
GREAT!! I told you but you have to use a ScrewDriver and pliers or wrench to hold the bottom emulsor.
Alleyoop
|
|
Junior
Currently Offline
2011 Taotao CY150-A 157QMJ
Posts: 100
A+'s: 0
Joined: Apr 16, 2012 9:23:19 GMT -6
|
Post by HotStuff2 on May 20, 2012 20:59:54 GMT -6
GREAT!! I told you but you have to use a ScrewDriver and pliers or wrench to hold the bottom emulsor. Alleyoop  |
|
|
|
Post by alleyoop on May 20, 2012 22:04:49 GMT -6
|
|
Junior
Currently Offline
2011 Taotao CY150-A 157QMJ
Posts: 100
A+'s: 0
Joined: Apr 16, 2012 9:23:19 GMT -6
|
Post by HotStuff2 on May 21, 2012 8:39:07 GMT -6
I went ahead and upped it to the 115 I had. That's the largest one I've got, and others who have the same Dragon Custom Big Shot Exhaust + Big Shot Air Intake have said that was the sweet spot. Crossing my fingers that I don't have to order a 120 or larger...  Did you see my thread post on the install of those?  |
|
New Student
Currently Offline
Posts: 4 
A+'s: 0
Joined: Sept 15, 2014 20:03:51 GMT -6
|
Post by hondamonstercamo on Sept 15, 2014 20:09:53 GMT -6
Alright, a forum members sold me a carb upjet kit for $8, and today I put on the Dragon Custom Big Shot Air Intake. Then I went to upjet the carb to at least a 110 (it has a 102 in it, at least that what's marked as.) However, it looks like I have a problem. Here's what my carb jets look like, compared to what he sent me: What is the forum members name on here that sold u that bc that's exactly what I need?  So it looks like those won't work. I don't know that leaving the new air intake on is a good idea, since the a/f mix is probably going to have too much air, and not enough fuel. The main jet does NOT come apart from the emulsifier tube. I've banged it up a bit trying to get it to do so, looks like it's one piece.  What are my options? Where can I get the correct carb jets? And while I'm waiting for them to arrive, is there anything I can do?  |
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Sept 15, 2014 20:03:51 GMT -6
|
Post by hondamonstercamo on Sept 15, 2014 20:11:02 GMT -6
What is the forum members name on here bc that's exactly what I need right there
|
|
|
|
Post by alleyoop on Sept 15, 2014 20:27:35 GMT -6
CLICK ON THE PICTURE TO EXPAND IT AND READ WHAT I LABELED EACH PART IS: Alleyoop  |
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Sept 15, 2014 20:03:51 GMT -6
|
Post by hondamonstercamo on Sept 15, 2014 20:32:53 GMT -6
I just need the defuser ( emulsion tube) for my 150cc go kart carb do uk anyone who sells just that?
|
|
|
|
Post by alleyoop on Sept 15, 2014 20:53:51 GMT -6
Your best bet is to find the cheapest carb your size and buy the whole thing, I see the tubes but none for a 24mm carb that would match a kehin or clone and they want almost what a whole carb costs.
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Sept 15, 2014 20:03:51 GMT -6
|
Post by hondamonstercamo on Sept 15, 2014 22:18:45 GMT -6
Yeah a kit to rebuild the carb i got is 20 bucks and I have delt with that company for a while and I called up the manager and asked if he could separate it put and he couldn't
|
|
..BAD TO THE BONE..
