Right switch assembly By speedracer (Read 662 times)

[speedracer]

OK experts tell me how to open the right switch assembly on 54B.



One screw holds it on the handlebar and there is one nut which comes from the throttle cable. I removed the screw and loosened the nut, and still can't open it. I used a screw driver to try to pry it open from the back and it will only slightly open.

The reason for this is to change the handlebar grips and the right grip has the throttle cable connected under the switch assembly.

Open for ideas or has someone already opened it.

Thanks

[JR]

Speedracer it has another screw (hard to see) on the opposite corner on the other side, get that one and it just pops right apart.

JR

[speedracer]

Just took a good luck and you are right it is there but hard to notice. That's what I get for trying to work in the garage at night with poor lighting. Another dumb mistake on my part. It should go easy now I hope. Thanks JR