New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Nov 18, 2012 11:59:20 GMT -6
|
Post by akell06 on Feb 6, 2013 17:56:36 GMT -6
yes, it is within a mm but i guessed on the measurement. let me know if there is any other things i should be checking in the mean time.
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Nov 18, 2012 11:59:20 GMT -6
|
Post by akell06 on Feb 5, 2013 18:21:08 GMT -6
the color of the wires are as follows
black / red blue / yellow green black / yellow pink (faded so bad looks white)
it is in a plug and looks like the picture above. i think the cdi that was on there was working and possibly even the coil because i was only getting .15 vac from the pick up coil when the engine was turning over. john got me the pick up coil but it was the wrong bolt pattern. i was just messing around with the cdi and coil last night and that is what happen. so can anyone get me the correct pick up coil (john? or anyone?) it was stated earlier i should get .5 vac
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Nov 18, 2012 11:59:20 GMT -6
|
Post by akell06 on Feb 4, 2013 19:57:45 GMT -6
ok so i obviously have ac and dc crossed on this atv or something. like i said, it melted the ignition coil and the cdi started to show signs of melting (also purchased new online) maybe an admin can edit this to show the pics to make it easier or tell me how. any help appreciated. John let me know if you can get the correct pickup coil cause i wont be able to make this one work. Ok I got the pictures up for you Alleyoop
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Nov 18, 2012 11:59:20 GMT -6
|
Post by akell06 on Feb 4, 2013 19:04:29 GMT -6
Ok still nothing. The pickup coil john sent doesnt fit and now the other coil I picked up off the net just smoked and melted....not good obviously. All pics have to be stored somewhere to post u guys dont allow uploads? Just asking. Have pics to post of ths thing.
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Nov 18, 2012 11:59:20 GMT -6
|
Post by akell06 on Nov 18, 2012 21:10:49 GMT -6
you got it! can you guide me in a direct for a descent price and the correct part?
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Nov 18, 2012 11:59:20 GMT -6
|
Post by akell06 on Nov 18, 2012 18:42:45 GMT -6
when you say pulse coil i'm assuming your talking what some people call the pick up coil. its inside the cover on the right side of the motor.
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Nov 18, 2012 11:59:20 GMT -6
|
Post by akell06 on Nov 18, 2012 15:58:30 GMT -6
between the 2 leads i am only getting .15 while cranking. sounds like thats the problem?
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Nov 18, 2012 11:59:20 GMT -6
|
Post by akell06 on Nov 18, 2012 14:55:04 GMT -6
yes i have 12v to the wire at the cdi and the coil as well. i will examine the print above while i await a response.
thanks again!
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Nov 18, 2012 11:59:20 GMT -6
|
Post by akell06 on Nov 18, 2012 12:06:21 GMT -6
i know this is a scooter board but was hoping someone would have an idea of what is up with this linhai 260 atv (manco).
purchased a new vog coil but not even sure if that was the correct one. i get a single spark only when flipping the kill on the left handle bar. each time it is flipped between the 2 positions 1 spark will occur.
not sure if the digital ignitor is bad or not. did purchase a cdi that looked close but same thing happening. wires to digital ignitor are as follows
black / red blue / yellow green black / yellow pink (faded so bad looks white)
any testing a guy can do on this to see if it is bad?
thanks in advance!
|
|