linhai 260 spark issue By akell06 (Read 17,133 times)

[akell06]

i know this is a scooter board but was hoping someone would have an idea of what is up with this linhai 260 atv (manco).

purchased a new vog coil but not even sure if that was the correct one. i get a single spark only when flipping the kill on the left handle bar. each time it is flipped between the 2 positions 1 spark will occur.

not sure if the digital ignitor is bad or not. did purchase a cdi that looked close but same thing happening. wires to digital ignitor are as follows

black / red
blue / yellow
green
black / yellow
pink (faded so bad looks white)

any testing a guy can do on this to see if it is bad?

thanks in advance!

[tvnacman]

looks like you should have 12vdc at the red /white wire , with the key in the run position .

John

[JR]

Welcome to the forum. We may be a scooter forum but we'll still try to help. First of all do you have the huge Linhai Up to 300cc ATV service manual? I'm in the process of downloading it to my server and it's a huge manual but loaded with lots of helpful information.

Second of all do you have a wiring diagram for this ATV? If not here is one:



Now I'm not familiar with a digital ignitor but I'm presuming this is another name for CDI?. The pinkish wire you're talking about according to the diagram is actually red/white and heads to the fuse box as just like all linhais I've dealt with it's a DC powered CDI system. No power on this wire = no spark. Need to verify this wire has 12Vdc with the key on.

We're here to help so keep us informed.

JR

[akell06]

yes i have 12v to the wire at the cdi and the coil as well. i will examine the print above while i await a response.

thanks again!

[tvnacman]

check to see if your getting a pulse signal from the pick up coil (do you know how to do that) over .5 vac while cranking



John

[akell06]

between the 2 leads i am only getting .15 while cranking. sounds like thats the problem?

[tvnacman]

where does the pulse coil mount on your scooter ?

John

[akell06]

when you say pulse coil i'm assuming your talking what some people call the pick up coil. its inside the cover on the right side of the motor.

[tvnacman]

that is what I'm talking about . seems like that is bad , just to be sure did you check for ACV ?

John

[akell06]

you got it! can you guide me in a direct for a descent price and the correct part?

[tvnacman]

.chinesepartswholesale.com/product_info.php?products_id=61292" rel="nofollow" target="_blank">.chinesepartswholesale.com/product_info.php?products_id=61292

pm me for a price shipped

[JR]

Well guys look like we're going to have to add an addition to our forum! ATV's


Here's that huge Linhai ATV Service manual:

Linhai 260/300 ATV Service Manual

JR

[alleyoop]

JR, maybe you can change the forum page to show ATVs as well. As far as motor and electrical they are all pretty much sameo sameo.
Alleyoop

[JR]

Nov 19, 2012 1:14:27 GMT -6 alleyoop said:

JR, maybe you can change the forum page to show ATVs as well. As far as motor and electrical they are all pretty much sameo sameo.
Alleyoop

Kind of what I was thinking too Alley.

[akell06]

Ok still nothing. The pickup coil john sent doesnt fit and now the other coil I picked up off the net just smoked and melted....not good obviously. All pics have to be stored somewhere to post u guys dont allow uploads? Just asking. Have pics to post of ths thing.