Question: By richardthescooter3 (Read 904 times)

[richardthescooter3]

Where can I get one of these center-stand rubber bumper

Attachments:

[scooteraddict]

You can get it at roketa.com

.roketa.com/product/product_support.jsp?cateID=2610&sonCateID=0&proID=27312" rel="nofollow" target="_blank">.roketa.com/product/product_support.jsp?cateID=2610&sonCateID=0&proID=27312

Look under frame assembly, part # 25

[richardthescooter3]

Thanks scooteraddict

[jct842]

I would be willing to bet that if you went to one of the old fashioned auto parts stores and they let you look in the stock for body mount bushings you could find one that could be made to work. The auto manufacturers have been using similar stuff to isolate vibrations from frame to body for a long time. john

[richardthescooter3]

Thanks guys, I've fix it temporarily for now I turned the bad side so it won't hit the bottom, replaced the bolt, added some washers inside and out, tighten it real tight that's a good idea jct842, I'll check that out

Attachments:

[JR]

Ace hardware has a lot of these type bushings and also here;

.powersportsmax.com/product_info.php/products_id/13501" rel="nofollow" target="_blank">.powersportsmax.com/product_info.php/products_id/13501

JR

[richardthescooter3]

Thanks JR

[bhinch]

Yep....I ordered the same rubber bumpers from Roketa and received two different size bumpers...different size bolt holes....they never ship two items the same ...oh well...one was correct for bolt size....enjoy the ride...