Compatibility advice needed By yoster (Read 2,283 times)

[yoster]

Hey gang,

Need to change the left/rear master cylinder on my 244cc scoot.

Can you confirm if the one below will work? It LOOKS like it will (besides being the wrong color).. but you know how that goes...

It doesn't show the under-side.. where the electrical connection is for the brake lights.. so want to double check with you:
.ebay.com/itm/Left-Side-Chinese-Brake-Master-Cylinder-Pit-Bike-Parts-Roketa-Parts-ATV-SSR-V-2-/200704463720?pt=LH_DefaultDomain_0&hash=item2ebaeb1368#ht_578wt_1166" rel="nofollow" target="_blank">.ebay.com/itm/Left-Side-Chinese-Brake-Master-Cylinder-Pit-Bike-Parts-Roketa-Parts-ATV-SSR-V-2-/200704463720?pt=LH_DefaultDomain_0&hash=item2ebaeb1368#ht_578wt_1166

Is there a non-chinese version that would fit (i.e.: last me longer)

Thanks!


PS - I'm taking the Motorcycle Safety class tomorrow.. figured I should do it after 4 years. Looking forward to riding a "real" motorcycle for the first time!

[JR]

Nope wrong one Yoster doesn't have the mirror mount. Be gone for a few hours and will look when I return.

JR

[yoster]

Oh wow.. didn't even think about that. I'll await your return. Thanks!

[cruiser]

Here are some brake cylinders. The fifth one down looks like the right one. Make the measurements like the web site suggests.

.scooterparts4less.com/Moped_Web/Moped_Master_Cylinder.htm" rel="nofollow" target="_blank">.scooterparts4less.com/Moped_Web/Moped_Master_Cylinder.htm

.scooterparts4less.com/Moped_Web/Moped_RightMasterCylinder_Mirror.jpg" rel="nofollow" target="_blank">.scooterparts4less.com/Moped_Web/Moped_RightMasterCylinder_Mirror.jpg

[JR]

This looks like a good buy but be sure to PM them and ask if it for surte fits your scooter?

.ebay.com/itm/Scooter-Brake-Master-Cylinder-Left-Front-BONUS-Switch-/270784079293?pt=Other_Vehicle_Parts&hash=item3f0bfd25bd&vxp=mtr" rel="nofollow" target="_blank">.ebay.com/itm/Scooter-Brake-Master-Cylinder-Left-Front-BONUS-Switch-/270784079293?pt=Other_Vehicle_Parts&hash=item3f0bfd25bd&vxp=mtr

JR

[damin69]

Apr 27, 2012 4:42:56 GMT -6 JR said:

This looks like a good buy but be sure to PM them and ask if it for surte fits your scooter?

.ebay.com/itm/Scooter-Brake-Master-Cylinder-Left-Front-BONUS-Switch-/270784079293?pt=Other_Vehicle_Parts&hash=item3f0bfd25bd&vxp=mtr" rel="nofollow" target="_blank">.ebay.com/itm/Scooter-Brake-Master-Cylinder-Left-Front-BONUS-Switch-/270784079293?pt=Other_Vehicle_Parts&hash=item3f0bfd25bd&vxp=mtr

JR

JR there is no Mirror mount on that one either.

[JR]

I'm asleep, forget that one! Yoster! Back to the drawing board!

[yoster]

Apr 26, 2012 18:34:12 GMT -6 cruiser said:

Here are some brake cylinders. The fifth one down looks like the right one. Make the measurements like the web site suggests.

.scooterparts4less.com/Moped_Web/Moped_Master_Cylinder.htm" rel="nofollow" target="_blank">.scooterparts4less.com/Moped_Web/Moped_Master_Cylinder.htm

.scooterparts4less.com/Moped_Web/Moped_RightMasterCylinder_Mirror.jpg" rel="nofollow" target="_blank">.scooterparts4less.com/Moped_Web/Moped_RightMasterCylinder_Mirror.jpg

So unfortunately, it looks like it's the 2nd one on that site (the 5th one is the skinny version - you can tell by the screw holes in the top being offset rather than in the center, even with each other.)

I'll keep looking for a better deal though - why does my version have to be the most expensive? LOL

[yoster]

Oh wait.. that's for a set.. I'll see if he can sell me just the left side.

[tvnacman]

Check cpw, I did a drum to disk conversion. I missed the mirror mount on the master. Then found a mirror mount. . Now the head light switch won't seat correctly. I also had to grind some of the plastic around the lever. It good enough.
John

[yoster]

Ok this has got to be it:

.ebay.com/itm/Scooter-Front-Brake-Master-Cylinder-Left-/120841313279?pt=Other_Vehicle_Parts&hash=item1c22b41bff&vxp=mtr#ht_1901wt_1163" rel="nofollow" target="_blank">.ebay.com/itm/Scooter-Front-Brake-Master-Cylinder-Left-/120841313279?pt=Other_Vehicle_Parts&hash=item1c22b41bff&vxp=mtr#ht_1901wt_1163

Anyone disagree?

[JR]

Yep! wrong brake switch, your scooter uses the switch like this that mounts with two screws and thr wires plug on, doesn't have a pigtail type switch like that one, will keep looking, just got back in from softball game.

.ebay.com/itm/New-Left-Hydraulic-Brake-Light-Switch-for-GY6-50cc-150cc-250cc-Gas-Scooter-Moped-/270960270928?pt=Motorcycles_Parts_Accessories&hash=item3f167d9e50&vxp=mtr" rel="nofollow" target="_blank">.ebay.com/itm/New-Left-Hydraulic-Brake-Light-Switch-for-GY6-50cc-150cc-250cc-Gas-Scooter-Moped-/270960270928?pt=Motorcycles_Parts_Accessories&hash=item3f167d9e50&vxp=mtr

[yoster]

Thanks Cappin' JR!

[JR]

Here is the cyclinder but they are out of stock so thew search continues;

.scooterparts4less.com/Moped_Web/Moped_Master_Cylinder_Left_Mirror.jpg" rel="nofollow" target="_blank">.scooterparts4less.com/Moped_Web/Moped_Master_Cylinder_Left_Mirror.jpg

[yoster]

Man who woulda thought this would have been so difficult lol.

Even that one doesn't match the one I'm replacing though. My screws are in the center of the top cap - across from each other (not diagonal/in the corners like the one in the pic.) The one in the pic looks physically smaller than mine.. just by a bit.