|
|
Post by crwford on Sept 25, 2015 16:24:15 GMT -6
|
|
|
|
Post by crwford on Sept 23, 2015 12:38:29 GMT -6
But did he get it going?
|
|
|
|
Post by crwford on Sept 22, 2015 3:25:12 GMT -6
Did they tell you how long your repairs will take? As far as the reverse jerking my wife's did that also if they do have a fix let me know I never really got that worked out. How she worked it she held on to brake till she felt it ready to move then let go of brake. I'm putting sliders in cvt to see if will help that problem.
|
|
|
|
New Here.
by: crwford - Sept 14, 2015 19:25:49 GMT -6
Post by crwford on Sept 14, 2015 19:25:49 GMT -6
hey welcome
|
|
|
|
Post by crwford on Sept 9, 2015 20:29:33 GMT -6
Well Rapid Jim got my fat out of fire he got me a new axle said he was sorry about 5 days wait on shipping hell I'll take that over 2 months. any day my wife will be happy to get her trike back I might even get a reward wishful thinking LOL
|
|
|
|
Post by crwford on Sept 8, 2015 19:58:01 GMT -6
Here is the axle I hope  |
|
|
|
Post by crwford on Sept 8, 2015 19:40:35 GMT -6
rear end is solid tube to get axle out you pull disk brake, rotor assembly remover dust cover from bearing remove snap ring and us slide puller and hit it comes right out. But the axle being in 2 pieces it looks like it been heat treated very hard it snapped rear clean like a sharp knife cut it. can you weld something that hard? and have it hold up? I will have to look around here a see if It can be done. Rapid Jim is also seeing what he can do for a replacement axle. You know this axle is close dia of a mid size car it truly surprise me when I got it out.
|
|
|
|
Post by crwford on Sept 8, 2015 0:36:02 GMT -6
|
|
|
|
Post by crwford on Sept 6, 2015 21:00:35 GMT -6
Wasn't this unit PDI in knoxville if so he should be fixing it for you ad it should be right.
|
|
|
|
Post by crwford on Sept 6, 2015 20:58:04 GMT -6
When who ever install tire on rim did they lube it real well it should have been on rim also. then remove valve core put air till it pops on rim or till tire goes all the way around on rim seat. Once you hear bead pop let some air out and install core and check pressure and adjust were needed. you may need extra air to get tire on rim up to 50 PSI. If you can't get them on right bring them over I will install them for you.
|
|
|
|
Post by crwford on Sept 2, 2015 21:23:23 GMT -6
I already had them done on my wife's trike the red one you seen works great I believe 7 dollars each I did bring them in hand not sure if price reflected for that. The triple tree each had way to much slop the # 2 white one was the worst of bunch PDI was done by Ice Bear and must have been done by Drunks or blind people or both in came in as a basket case it was to be a 2015 came in a 2013 and then battle started with seller they tell me none of there problems they never have before. I think they pulled a bate and switch and got caught. I really can't believe them because one person says they won't tell Ice Bear they will eat it something is fishy and smells bad here. Now I have another white one total of 3. That is why I asked you if you had a contact # After they send me all parts needed to fix # 2 I will send a register letter with pictures and get there side of the story.
|
|
|
|
Post by crwford on Sept 2, 2015 14:20:52 GMT -6
I will be taking weights on rollers in CVT to find out what they come with and will order DR sliders in place of them. I will have my rear wheels spin balance at co-op I just finished the front wheel balance. I will install the remote start like I put in wifes bike with alarm. I will adjust the triple tree in front on all 3 trikes all were out of adjustment. I bet yours will be will be needed to ask your dealer if he made a final adjustment on it, I bet he did not because you have to take off the plastic's on dash to even get to it. It may even help with wobble.
|
|
|
|
Post by crwford on Aug 31, 2015 21:29:09 GMT -6
Just finished building my newest my # 3 white trike Zodiac need gas tomorrow and will go for a test ride many twinks for this one this will be mine for sure.
|
|
|
|
Post by crwford on Aug 30, 2015 20:26:00 GMT -6
Not complaining love it
|
|
|
|
Post by crwford on Aug 30, 2015 20:24:48 GMT -6
No I go through dealer most of time lip service keep me inform if you get a answer
|
|
