New Student
Currently Offline
Posts: 9 
A+'s: 1
Joined: Jan 26, 2015 15:58:29 GMT -6
|
Post by durtturbine on Jan 30, 2015 10:12:35 GMT -6
|
|
New Student
Currently Offline
Posts: 9
A+'s: 1
Joined: Jan 26, 2015 15:58:29 GMT -6
|
Post by durtturbine on Jan 30, 2015 10:00:32 GMT -6
I got compression but it didn't seem like it was strong enough. I've read it's supposed to be enough to throw your thumb off. It poped it off but barely. I'll take some pics. Give me a little.
|
|
New Student
Currently Offline
Posts: 9
A+'s: 1
Joined: Jan 26, 2015 15:58:29 GMT -6
|
Post by durtturbine on Jan 29, 2015 17:18:07 GMT -6
Mk so upon further inspection it looks like there is an excessive amount of oil in the combustion chamber. Is that a normal thing with scooters or???
|
|
New Student
Currently Offline
Posts: 9
A+'s: 1
Joined: Jan 26, 2015 15:58:29 GMT -6
|
Post by durtturbine on Jan 29, 2015 17:03:09 GMT -6
Alrighty, Got a spark, also took the carb apart again just to make sure i cleaned everything right. Still not cranking. Any other recommendations ?
|
|
New Student
Currently Offline
Posts: 9
A+'s: 1
Joined: Jan 26, 2015 15:58:29 GMT -6
|
Post by durtturbine on Jan 27, 2015 22:11:02 GMT -6
Alright so I don't have a plug socket or a wrench thatll fit it. It'll have to wait till friday. Thanks for you guys help! Ill be back Friday  |
|
New Student
Currently Offline
Posts: 9
A+'s: 1
Joined: Jan 26, 2015 15:58:29 GMT -6
|
Post by durtturbine on Jan 27, 2015 21:11:30 GMT -6
Roger that, Let me try it real quick.
|
|
New Student
Currently Offline
Posts: 9
A+'s: 1
Joined: Jan 26, 2015 15:58:29 GMT -6
|
Post by durtturbine on Jan 27, 2015 18:59:40 GMT -6
Alright. So I figured the wiring out. It will turn now but not crank. This is my first scooter ever. I've worked on cars all my life. So I'm guessing change spark plug now?  |
|
New Student
Currently Offline
Posts: 9
A+'s: 1
Joined: Jan 26, 2015 15:58:29 GMT -6
|
Post by durtturbine on Jan 27, 2015 8:10:25 GMT -6
Negative. I also posted on another forum, someone mentioned that this engine might not have a Cdi. The guy I bought it off of said it was a 1999. Also if you look at the picture of the battery box, it has one small red wire and one small black wire both crudely spliced into the battery wires. Not sure what those were for.
UPDATE: Rewired in the old ignition switch. Pulling the brake(tried both brakes) and pushed power button still does nothing. I'm at a loss right now. Dunno what else to try.
|
|
New Student
Currently Offline
Posts: 9
A+'s: 1
Joined: Jan 26, 2015 15:58:29 GMT -6
|
Post by durtturbine on Jan 26, 2015 16:19:06 GMT -6
I recently bought a SUNL qm50qt-3e 50cc scooter off of my local craigslist. Well I got it home and cleaned the carb out tried to crank it...Nothing. Opened up the scooter(Took all the cheap plastic off) and the ignition is wired ass backwards. Its crudely taped up. The busted ignition switch has 5 wires coming out where as the wires going into the harness are only 4. Here are some pictures. Could you all tell me what wire goes to each? I can Crank the scooter using this thing.  Here are the wires going into the harness  The old ignition  The New Ignition  My battery box...I thought there was supposed to be a "CDI"?  |
|
