New Student
Currently Offline
Posts: 2 
A+'s: 0
Joined: Feb 22, 2014 7:35:34 GMT -6
|
Post by dazzler on Feb 23, 2014 4:24:12 GMT -6
You need a fuse or you could burn the harness , just looking at a fuse is not 100% that it is good it needs to be checked with a meter or test light . As far as it not holding idle if you hold the throttle will it stay running ? John Hi, thanks for the reply. Yes, once kickstarted the engine runs fine and the lights come on. The indicators don't flash, however and there is hardly any horn. Hope that helps. |
|
New Student
Currently Offline
Posts: 2
A+'s: 0
Joined: Feb 22, 2014 7:35:34 GMT -6
|
Post by dazzler on Feb 22, 2014 7:49:04 GMT -6
Hi,
Had a scan through the threads and very impressed by the level of help offered by members so hopefully some of you can help with this.
I have a Znen 125t and when I turn the key to ignition there's nothing. No fuel gauge movement, lights, or horn. So obviously no electrical start either. The bike will start with the kickstart but won't idle, which is a bit of a pain.
I thought it was a battery problem so have replaced with a new one but to no avail. Fuse 'looks' good and have tried the spare in also which 'looks' good too. Is the fuse a necessity?
Thanks very much for taking the time and sorry if there is a similar thread to this, I did try a search but it didn't work.
Daz
|
|
