New Student
Currently Offline
Posts: 3 
A+'s: 0
Joined: Feb 8, 2014 13:17:08 GMT -6
|
Post by redscoot on Feb 14, 2014 22:16:01 GMT -6
Thank you all for the wonderful amount of information you have provided. I now have plenty of stuff to try tomorrow. I will post my results afterwards.
|
|
New Student
Currently Offline
Posts: 3
A+'s: 0
Joined: Feb 8, 2014 13:17:08 GMT -6
|
Post by redscoot on Feb 9, 2014 11:11:19 GMT -6
I have the horizontal engine. Here are some pics of my current configuration. What are the 3 ports on the fuel pump? there are no markings to determine how it is to be connected? Also, there are at least 2 capped off fittings on the carb, is that correct?
Thanks for the help!
|
|
New Student
Currently Offline
Posts: 3
A+'s: 0
Joined: Feb 8, 2014 13:17:08 GMT -6
|
Post by redscoot on Feb 8, 2014 13:42:17 GMT -6
Hello board, newbie here. I am looking for a picture or illustration of the vacuum line connections to the carb and fuel pump. I recently purchased a Roteka MC-54-250B which I believe to be a 2007 model. The guy I bought it from told me he installed a new improved fuel pump on it. The scooter starts and will run for a bit, then it dies as if it has run out of gas. I replaced the fuel filter, changed the oil, and cleaned the air filter. With the scooter on it's stand, if I run it at high RPM for a while, the fuel in the filter seems to drain right before it quits. There is a black cylindrical canister mounted on the frame with some hoses coming off it that are not attached anywhere. I think when the previous owner put the new fuel pump on, he messed up hooking the vacuum lines back up. Any help getting them straightened out would be appreciated.
|
|
