New Student
Currently Offline
Posts: 24
A+'s: 0
Joined: Dec 30, 2012 22:20:08 GMT -6
|
Post by scooter99 on Dec 31, 2012 15:02:27 GMT -6
yes i have them both of the valves adjusted to .oo4 and i should mention that i replaced the head with a new one. Every time the engine is the the compression stroke, it sounds like air is coming out. And it sounds like its coming from within the timing chain hole. do you think that could be the problem. Or should that be the way that is supposed to sound.
|
|
New Student
Currently Offline
Posts: 24
A+'s: 0
Joined: Dec 30, 2012 22:20:08 GMT -6
|
Post by scooter99 on Dec 31, 2012 14:48:22 GMT -6
And i just pulled the hose out of the intake and fuel cane gushing out.
|
|
New Student
Currently Offline
Posts: 24
A+'s: 0
Joined: Dec 30, 2012 22:20:08 GMT -6
|
Post by scooter99 on Dec 31, 2012 14:41:00 GMT -6
How hard should i press my finger in the spark plug hole because i tried that and my finger didn't move one bit. But after i let go i felt the air come rushing out
|
|
New Student
Currently Offline
Posts: 24
A+'s: 0
Joined: Dec 30, 2012 22:20:08 GMT -6
|
Post by scooter99 on Dec 31, 2012 14:22:18 GMT -6
And i do have a spark
|
|
New Student
Currently Offline
Posts: 24
A+'s: 0
Joined: Dec 30, 2012 22:20:08 GMT -6
|
Post by scooter99 on Dec 31, 2012 14:10:23 GMT -6
I checked all of the connections and they seem to be tight. Everything seems to be grounded. I looked at the CDI and it looks like there are two weirs missing. I don't know if this is how they should be or if i'm missing some weirs. Please let me know. Attachments:
|
|
New Student
Currently Offline
Posts: 24
A+'s: 0
Joined: Dec 30, 2012 22:20:08 GMT -6
|
Post by scooter99 on Dec 31, 2012 12:33:17 GMT -6
Yes i took the spark plug out and checked for a spark and it dose have a spark.
|
|
New Student
Currently Offline
Posts: 24
A+'s: 0
Joined: Dec 30, 2012 22:20:08 GMT -6
|
Post by scooter99 on Dec 31, 2012 12:27:40 GMT -6
Hey everyone i had a few problems yesterday with the wiring. The problem was that i was missing a ground wire from the battery to me engine block. I got that fixed. But my 2008 lancer Venice still wont start up. Every time i hit the start button is sounds like the engine is turning fine but it wont fire up. Can someone tell me what to do to pin-point the problem.
|
|
