Post by motocarr on Jul 25, 2023 10:25:24 GMT -6
Trying to get my neighbors 250cc back on the road. Given the condition of the CDI, I am assuming that is why I there is no spark.
My connector reads:
Key on, kill switch set to run:
Green=Ground
Yellow/Black=Coil 12v
Black=battery? 12v
Red/white=Trigger? No reading at rest, .03 - .45 while cranking
Key on, kill set to stop:
Green=Ground
Yellow/Black=Coil 12v
Black=battery? 12v
Red/white=Trigger? Changes to a ground
I can't seem to find a CDI that matches the connector on this bike, that being said can I grab a different one and wire it in?
My connector reads:
Key on, kill switch set to run:
Green=Ground
Yellow/Black=Coil 12v
Black=battery? 12v
Red/white=Trigger? No reading at rest, .03 - .45 while cranking
Key on, kill set to stop:
Green=Ground
Yellow/Black=Coil 12v
Black=battery? 12v
Red/white=Trigger? Changes to a ground
I can't seem to find a CDI that matches the connector on this bike, that being said can I grab a different one and wire it in?