New Student
Currently Offline
Posts: 1
A+'s: 0
Joined: Sept 2, 2019 7:47:51 GMT -6
|
Post by hay2u on Sept 2, 2019 8:04:02 GMT -6
Hi ; Hope someone can help. I have just bought a sinnis shuttle that has been vandalised. Ignition lock broken which I have replaced and connected the terminals to the remains of some cut wires coming out of the main loom.; Still no power to the bike. The battery is charged and ready to go. Now I find an unused terminal block ,,,its small and square with 8 or 9 terminal capacity right by the rectifier ( but not the rectifier as its there and plugged in) Any ideas what should be plugged in to this?
|
|
|
|
Post by cyborg on Sept 2, 2019 8:24:05 GMT -6
Could be the main distribution for the main power,,
|
|
New Student
Currently Offline
Posts: 3 
A+'s: 0
Joined: Oct 25, 2018 11:29:42 GMT -6
|
Post by milly on Sept 17, 2019 11:29:19 GMT -6
I had a scooter few yrs back with that amount of wires doing nothing and it was for the alarm and remote start but it did have a wire between two of the terminals on the plug and wouldn't run if they weren't plugged in. Sorry can't remember the two now but will see if I can find any info at some point.
|
|
