New Student
Currently Offline
Posts: 3
A+'s: 0
Joined: Jan 30, 2017 19:07:37 GMT -6
|
Post by 1me2ao on Jan 30, 2017 19:11:58 GMT -6
i have a jlqt 50 x1/8 scooter. found a black circle thing downstream of ignition with four wires , want to know what it is , kill switch, motion detetcor? tried to upload pic but couldnt figure thaf out either.
|
|
New Student
Currently Offline
Posts: 3
A+'s: 0
Joined: Jan 30, 2017 19:07:37 GMT -6
|
Post by 1me2ao on Jul 3, 2017 11:54:40 GMT -6
i have a jlqt 50 x1/8 scooter. found a black circle thing downstream of ignition with four wires , want to know what it is , kill switch, motion detetcor? tried to upload pic but couldnt figure thaf out either. figured out the above is a rectifier what i am now looking for is kill switch i have red switch left side horn red switch right side start haha green light blinkers lights etc. but i cant find the kill switxh amd wiring diagram says one is there cdi is 4+2 so i know one was there. any suggestions
|
|
New Student
Currently Offline
Posts: 3
A+'s: 0
Joined: Jan 30, 2017 19:07:37 GMT -6
|
Post by 1me2ao on Jul 4, 2017 10:27:15 GMT -6
ok back to basics starter button good, brake light coming on good , power to cdi , but not clicking or turning over , after power to cdi is far as i got today, solenoid good used screw driver and it turns over. from cdi next.
|
|
|
Post by cyborg on Jul 5, 2017 7:39:40 GMT -6
You never said what the bike is doing or not doing ,,,I assume it won't start,,,you crossed the solenoid terminals and it turns over ,,,if you have a test lite or multimeter pull the smaller solenoid control wires and see if you have power to the solenoid if you do solenoid is bad
|
|